Results 1 to 20 of 28

Thread: strapping the car down

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2001
    Location
    WI
    Posts
    164

    Default

    I have a similar setup with two fixed length straps on the front of the car which get attached first and then I pull the car back with the ratchet straps. Works well and allows me to quickly get the car positioned properly. The drawback is that very seldom is the car in the exact center of the trailer (width) so I always have one front strap that is tight and one that is slightly loose. Never been a problem but not ideal..

  2. #2
    Join Date
    Nov 2003
    Location
    Madison, MS
    Posts
    132

    Default

    Quote Originally Posted by ITC Racer View Post
    I have a similar setup with two fixed length straps on the front of the car which get attached first and then I pull the car back with the ratchet straps. Works well and allows me to quickly get the car positioned properly. The drawback is that very seldom is the car in the exact center of the trailer (width) so I always have one front strap that is tight and one that is slightly loose. Never been a problem but not ideal..
    That's exactly what I do, except my front straps are chains. My car is light, never had a problem.

  3. #3
    Join Date
    Feb 2001
    Location
    Wauwatosa, WI, USA
    Posts
    2,658

    Default

    Using one OEM tow loop front and rear I use a fixed lenght chain at the rear. Pin and clevis at the OEM rear tow loop and chain hook around 2 x 2 x 1/4 trailer angle iron open trailer. At the front I use a pin and clevis at the OEM tow loop with a logers over center lever with a chain hook around a 2 x 2 x 1/4 angle iron. By tightening down with the tow loops the suspension is taken out of the equation which I believe is a good thing. Less shock and spring movement. The chains have NEVER been found loose and the car has never moved in any direction while on the trailer.:cool:
    Have Fun ; )
    David Dewhurst
    CenDiv Milwaukee Region
    Spec Miata #14

  4. #4
    Join Date
    Nov 2005
    Location
    Nebraska City
    Posts
    223

    Default

    Quote Originally Posted by ddewhurst View Post
    Using one OEM tow loop front and rear . . .:cool:
    State law (not sure about Federal DOT) here requires FOUR load securement points.

    But whatever method you use, be sure you at least meet the letter of the law.
    Dave Webb
    Bare Bones Racing
    '84 VW GTI
    #17 ITB

  5. #5
    Join Date
    Feb 2003
    Location
    Grove City, OH, USA
    Posts
    1,449

    Default

    +1 fixed straps in front, around lower a-arm right against the point where they are mounted to the frame (not the wheel end). Axle strap around the solid beam rear axle to a ratchet. All straps clip to individual D-rings. Trailer has ramps for wheels and has no deck, so getting under to attach straps is not an issue.
    Bill Stevens - Mbr # 103106
    BnS Racing www.bnsracing.net
    92 ITA Saturn
    83 ITB Shelby Dodge Charger
    Sponsors - Race-Keeper Data/Video Aquisition Systems www.race-keeper.com
    Simpson Performance Products - simpsonraceproducts.com

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •