I added a fuel surge tank to my cell and decided why not do some other plumbing, the old combo of hard line/rubber line/braided line could be improved - rubber line out. With lots of AN fittings and hose in hand I went to work. Surge tank done, now I'm in the middle of relocating the pump to the top of the cell and am having second thoughts. The whole area is covered by an aluminum box as required but a search on the internet gives conflicting opinions on mounting a pump above the cell.

Is my setup going to....

be safe?

work fine?

...the pump will be easy to access now, that was the reason to move it. I have just the inlet and outlet hoses to run to the hard line and it's done, but no need to waste any more braided line if the pump isn't going to work where I got it. If you can't tell from the pic, the pumps a Bosch 044.

Car is a 2nd Gen RX7, exhaust exits on the right side of the picture so that's not a problem.