Just wanted to get IT.com's views on something that I saw on another site about rear control arms...

In a nutshell, here are the arms:



and another version:

[/b]
which another poster posted a parts list here:
Steel Swaged tube:

Swaged Steel Tubes: 5-8 SWAGE TUBE 17 IN 36187 14.95 59.80
Rod Ends: 1 2 X 5 8 MALE LH EML8-10 8.95 35.80
Rod Ends: 1 2 X 5 8 MALE RH EMR810 8.95 35.80
Lefthander Jam Nuts: 5-8 JAM NUT RH 0823105 0.85 3.40
Lefthander Jam Nuts: 5-8 JAM NUT LH 0823105L 0.85 3.40
Total 138.20 [/b]
and goes on to state:
BTW: the $138 option I posted above are installed on four SCCA ITA winning racecars. I will admit they are the lowest cost option and you should use a seals-it on the rod ends, but they work great.[/b]
Legal??!!!????! IMO (which is not really all that educated on the suspension rules) the only bar that could be done w/ rod ends would be the fore/aft bar that goes to the bottom of the hub that might be considered a traction bar.