I had my front bumper cover trashed @ Summit a couple of weeks ago on my 325I, my question is, can I replace it with the 325is M technic bumper cover and stay legal?
Thanks, or maybe not.
I had my front bumper cover trashed @ Summit a couple of weeks ago on my 325I, my question is, can I replace it with the 325is M technic bumper cover and stay legal?
Thanks, or maybe not.
Dan,
IMHO the 325is M-Technic is just as legal as any other 325 on that spec line. For those of us who know that car and how the bodywork was a precursor to the first E36 M3's, it will make sense. For those who may not, bring some documentation on the M-Technic to have in your stash. Do it!
Thanks for the response Andy, I can copy some documentation online and bring with me to the ARRC, just in case. I'll also have the ETK on my computer, if anyone else needs it, again, just in case.Dan,
IMHO the 325is M-Technic is just as legal as any other 325 on that spec line. For those of us who know that car and how the bodywork was a precursor to the first E36 M3's, it will make sense. For those who may not, bring some documentation on the M-Technic to have in your stash. Do it!
[/b]
Hey Andy... On a similar note:
Why wouldn't 17" wheels also be legal for the E36 325...as they appeared on the '94 M-Technics as well...???
Hmmm...
Dan,
IMHO the 325is M-Technic is just as legal as any other 325 on that spec line. For those of us who know that car and how the bodywork was a precursor to the first E36 M3's, it will make sense. For those who may not, bring some documentation on the M-Technic to have in your stash. Do it!
[/b]
Mark Andrews
ITS '92 BMW 325is
St. Louis
Hey Andy... On a similar note:
Why wouldn't 17" wheels also be legal for the E36 325...as they appeared on the '94 M-Technics as well...???
Hmmm...
[/b]
Spec line?
Christian J. Chandler
BMW 318is
#26 ITA
JiM Power
If true, then anything on that car is legal for other 325 cars, including 17" wheels. Ergo, 17s can be allowed via the Errors and Omissions process.IMHO the 325is M-Technic is just as legal as any other 325 on that spec line.[/b]
Or, the club needs to clearly - and quickly - de-list the M-Technic car from eligibility.
Legal in all except what is specified - like the max wheel diameter of 16", no? The spec line trumps.If true, then anything on that car is legal for other 325 cars, including 17" wheels. Ergo, 17s can be allowed via the Errors and Omissions process.
Or, the club needs to clearly - and quickly - de-list the M-Technic car from eligibility.
[/b]
Negative: the spec line describes, as in what the wheel size was on the car. That wheel size spec in the ITCS was never intended as a manual adjustment for what's stock on the car, or something that's anything but objective workshop data.The spec line trumps.[/b]
Either the M-Technic model is legal, along with all its standard equipment, or it's not; just as we allow the rear decklid spoilers on RX-7 GTUs and Miata Ms...
Not sure what you are saying on the RX-7's because the spoilers could come on GXL's, GTU's, GTUs's, etc - but I agree with you on the 'describes' piece. I say 'trumps' because to me it 'describes' what you can use. Semantics but I am definately wrong on that.Negative: the spec line describes, as in what the wheel size was on the car. That wheel size spec in the ITCS was never intended as a manual adjustment for what's stock on the car, or something that's anything but objective workshop data.
Either the M-Technic model is legal, along with all its standard equipment, or it's not; just as we allow the rear decklid spoilers on RX-7 GTUs and Miata Ms... [/b]
For sure the classification needs to be cleaned up.
I would think that (just like in the 2nd gen RX-7 listing WRT 16") you could just add "17" wheel not allowed" in the notes.
rear decklid spoiler was NOT part of the m-technic option.Negative: the spec line describes, as in what the wheel size was on the car. That wheel size spec in the ITCS was never intended as a manual adjustment for what's stock on the car, or something that's anything but objective workshop data.
Either the M-Technic model is legal, along with all its standard equipment, or it's not; just as we allow the rear decklid spoilers on RX-7 GTUs and Miata Ms...
[/b]
How about the M3 rockers and rear diffuser too?
Rob Driscoll
ITS 25
NER
Interesting........If you totaled your rockers, I guess you could.How about the M3 rockers and rear diffuser too? [/b]
17's are already legal on the car in ITR. in ITS, the spec line specifically limits the wheel size already to 16.
the m-technic was not a different car. it was a 325is with an m3 body kit (minus the decorative rear wing), m3 mirrors and different interior fabric. it even says "325is" on the rear decklid.
rear diffuser? decorative and i think it weighs more than stock bumper cover.
rockers? why? they are a bolt on plastic part that adds weight and lowers the min ride height measuring point. not good.
front bumper cover? i don't see it any advantage besides that it looks nicer. it is not any lower in front than the normal 325 cover, just different shape. same brake duct size. same foglights. it is actually harder to put a lower air dam on than the normal bumper cover due to the shape.
only issue, if you want to call it one, is that the m-technic also came with the screw on front bumper lip/splitter. it extends beyond what is allowed by IT rules....so you just take it off.
marshall
ITR 325 with m-technic front bumper cover. not for performance...it was all the junk yard had last year when i crunched the front and needed a replacement fast!
Greg is right. The book doesn't have a blanket statement that says that the vehicle must match all attributes on the spec line. Instead, it has a bunch of individual paragraphs that refer to the spec line. For example, the rule that refers to the wheel size column says:
"Cars may not fit wheel diameters smaller
than listed on their spec line. All [other] cars shall
retain the wheel diameter fitted as original equipment for
their make, model, and type."
I bracketed out the word "other" because it's not relevant to this conversation. Bottom line is, the car can't run anything SMALLER than listed on the spec line, *and* it must ("shall") use the wheel diameter fitted as OE.
If the car is claimed to be an M-Technic "model", then it MUST run 17".
On the other hand ... is the M-Technic a model? I don't think so, it was an option. Did IT ever have a clause (like SS and T) that says that only the base model of a vehicle can be used? If it did, and was later struck, then that deletion causes this rule to be somewhat in conflict.
Josh Sirota
ITR '99 BMW Z3 Coupe
Remember, I'm in ITR and I do use 17" wheels.Greg is right. The book doesn't have a blanket statement that says that the vehicle must match all attributes on the spec line. Instead, it has a bunch of individual paragraphs that refer to the spec line. For example, the rule that refers to the wheel size column says:
"Cars may not fit wheel diameters smaller
than listed on their spec line. All [other] cars shall
retain the wheel diameter fitted as original equipment for
their make, model, and type."
I bracketed out the word "other" because it's not relevant to this conversation. Bottom line is, the car can't run anything SMALLER than listed on the spec line, *and* it must ("shall") use the wheel diameter fitted as OE.
If the car is claimed to be an M-Technic "model", then it MUST run 17".
On the other hand ... is the M-Technic a model? I don't think so, it was an option. Did IT ever have a clause (like SS and T) that says that only the base model of a vehicle can be used? If it did, and was later struck, then that deletion causes this rule to be somewhat in conflict.
[/b]
Probably because, 20 years ago, those 16" wheels were wild state of the art things that everybody thought would be uber expensive to run, so to protect us from ourselves, they made them verbotten....
Jake Gulick
CarriageHouse Motorsports
for sale: 2003 Audi A4 Quattro, clean, serviced, dark green, auto, sunroof, tan leather with 75K miles.
IT-7 #57 RX-7 race car
Porsche 1973 911E street/fun car
BMW 2003 M3 cab, sun car.
GMC Sierra Tow Vehicle
New England Region
lateapex911(at)gmail(dot)com
Not true. Every car on the spec line can run any stock size, so if the 17's are legit, then every E36 325 can run them, and every M technic can run 15's. Of course the stock 17's are probaly wider than 7"...If the car is claimed to be an M-Technic "model", then it MUST run 17".
[/b]
The M-technic also has the M3 suspension doesn't it? So the lower x-brace would be legal as well?
Not true. Every car on the spec line can run any stock size, so if the 17's are legit, then every E36 325 can run them, and every M technic can run 15's. Of course the stock 17's are probaly wider than 7"...
The M-technic also has the M3 suspension doesn't it? So the lower x-brace would be legal as well? [/b]
Do you know for sure that the M- Technic had the X- Brace? If so then it should be right?
no! the m-technic did not have the m3 suspension or brakes.
The M-technic also has the M3 suspension doesn't it? So the lower x-brace would be legal as well?
[/b]
no, it did not come with the x-brace either. only the e36 convertibles and m3 lightweight came with the x-brace. it was not an option either. it is just a bmw part that fits the chassis. it is not legal in IT.
Just connecting the dots... I read the M-technic has the M3 suspension, and as I understand the M3 has the x-brace (as well as the convertibles, but the drop top is not included on the spec line).
Bookmarks