Results 1 to 3 of 3

Thread: quick balast question

  1. #1
    Join Date
    Feb 2005
    Location
    Basking Ridge, NJ, USA
    Posts
    267

    Default

    Im about to mount some balast and in reading the gcr i was not clear on the wording for placement. It says that the balast goes in the passenger footwell/seating area. but I was unclear of the sentence underlined below. can someone clarify whether i have to put it in the footwell or if i can mount back where the base of the seat had been. Thanks

    "All ballast shall be located in the front passenger footwell/seating area, aft of the firewall and any footwell angle, and forward of the aft-edge of the forward-most passenger door opening, unless otherwsie specified on the vehicle’s spec line"

  2. #2
    Join Date
    Nov 2001
    Location
    Wheaton, IL
    Posts
    1,893

    Default

    The ballast has to be in front of the back edge of the passenger door.
    Chris Schaafsma
    Golf 2 HProd

    AMT Racing Engines - DIYAutoTune.com

  3. #3
    Join Date
    Jan 2001
    Location
    Central Florida
    Posts
    1,225

    Default

    More specific to the RX7, the ballast can go anywhere in the passenger area from the forward angle where the ECU mounts to the vertical wall just behind the front seat area. The rule actually gives you another inch or two the rear edge of the door opening, but it's not realistic to try.
    Chris Wire
    Team Wire Racing ITS #35

    www.themotorsportshour.com
    "Road Racing on the Radio"
    WPRK 91.5 FM
    wprkdj.org

    "Tolerance is the last virtue of a degenerating society" - Unknown


Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •