Results 1 to 8 of 8

Thread: Pulley questions

  1. #1
    Join Date
    Jan 2001
    Location
    Central Florida
    Posts
    1,225

    Default

    I'd like some opinions as to whether or not you guys feel that the oversize alternator pulley is a must-do? Trying to decide whether to spend the $65 or put it elsewhere.

    Also, in the same vein, can anyone provide the appx length of the drive belt with and without the alternator pulley. I hate running back and forth to the parts store.

    I already have the eccentric/water pump pulleys. Just looking to see what else may/may not be necessary.

    Thanks for the help.
    Chris Wire
    Team Wire Racing ITS #35

    www.themotorsportshour.com
    "Road Racing on the Radio"
    WPRK 91.5 FM
    wprkdj.org

    "Tolerance is the last virtue of a degenerating society" - Unknown


  2. #2
    Join Date
    Feb 2004
    Location
    San Clemente, Ca, USA
    Posts
    95

    Default

    <strike>With the small eccentic pulley and the stock alternator pulley I use a 30.5" belt.</strike>

    Oops, never mind, I see you are ITS so you&#39;re talking about a 2nd gen.
    Never underestimate a man that owns a Sawzall and a welder.

  3. #3
    Join Date
    Oct 2004
    Location
    Asheville, NC US
    Posts
    1,626

    Default

    The pulley is well worth it in my opinion. I will get you a belt number when I unload the car tonight.
    Steve Eckerich
    ITS 18 Speedsource RX7
    ITR RX8 (under construction)

  4. #4
    Join Date
    Feb 2001
    Location
    Wauwatosa, WI, USA
    Posts
    2,658

    Default

    Yes on the over sized accesory pulleys & yes on the under sized on the e-shaft pulley. Bought them ALL from Mazda Motorsports.

    ***I already have the eccentric/water pump pulleys.***

    Chris, what is an eccentric/water pump pulley?
    Have Fun ; )
    David Dewhurst
    CenDiv Milwaukee Region
    Spec Miata #14

  5. #5
    Join Date
    Oct 2002
    Location
    Wandering the USA
    Posts
    1,341

    Default

    ***I already have the eccentric/water pump pulleys.***

    Chris, what is an eccentric/water pump pulley? [/b]
    David, you of all people should know this - Chris&#39; water pump pulley is just a little different.

    Marty Doane
    ITS RX-7 #13 (sold)
    2016 Winnebago Journey (home)

  6. #6

    Default

    I run the same setup. ITS RX-7 it too is a speedsource car.
    My belt is a Goodyear 13311 M - 10AV0785

    Hey Steve you in Asheville? I&#39;m in Erwin TN just past Mars Hill...

    Just got thiss Speedsource car maybe we hang at Carolina Motorsports or VIR Event...



    Chadd Landress
    CK~Evolution Racing
    Speedsource RX-7 ITS
    # 58
    Chadd Landress
    ITS RX-7
    CK~Evolution Racing/Speedsource
    # 58

  7. #7
    Join Date
    Jan 2001
    Location
    Central Florida
    Posts
    1,225

    Default

    Yes on the over sized accesory pulleys & yes on the under sized on the e-shaft pulley. Bought them ALL from Mazda Motorsports.

    ***I already have the eccentric/water pump pulleys.***

    Chris, what is an eccentric/water pump pulley?
    [/b]
    That&#39;s plural, Dave! Eccentric shaft AND water pump pulllleeeeeezzz!

    Man this is a tough room!

    Where&#39;s Fred?
    Chris Wire
    Team Wire Racing ITS #35

    www.themotorsportshour.com
    "Road Racing on the Radio"
    WPRK 91.5 FM
    wprkdj.org

    "Tolerance is the last virtue of a degenerating society" - Unknown


  8. #8
    Join Date
    Feb 2001
    Location
    Wauwatosa, WI, USA
    Posts
    2,658

    Default

    ***Eccentric shaft***

    Duh,

    Is there a seniors race site any where. Better yet how about a seniors class for racing. We may have been through the wars of knowledge but the reflexes (brain) do fade a bit.
    Have Fun ; )
    David Dewhurst
    CenDiv Milwaukee Region
    Spec Miata #14

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •