Results 1 to 12 of 12

Thread: Looking for racing seat reviews

  1. #1
    Join Date
    Apr 2001
    Location
    Orlando, FL
    Posts
    185

    Default

    I am going to be buying a new racing seat for an ITA Nissan 240sx and wanted to get reviews and educated on the various seats available. Some of the questions I have are:

    Aluminum vs. fiberglass

    Brands: Kirkey, Ultrashield, Momo, Sparco etc. etc.

    How much does does the safety factor increase from the cheaper seats to the more expensive seats. I am also a Clydesdale so I am looking for a seat for someone 6'4".

    Any feedback would be appreciated.
    Hammer
    CFR
    ITA Nissan 240sx #56
    2009 Nissan GTR
    2010 Nismo 370z
    http://www.ReedNissan.com/

  2. #2
    Join Date
    Dec 2006
    Location
    Dallas, TX
    Posts
    564

    Default

    Lots of posts out there on this. I just researched last week and decided on a Momo Start (I'm 5'11" and 180lbs). I had a 17" Kirkey intermediate oval track seat that came with my car. It did the job but I like to buy things and wanted something better. The Momo Start is an FIA seat and seems to be the best bang for the buck. I paid less than $300 shipped from LTB. It's getting installed today If price was not a consideration I would have liked a Racetech seat.
    Mark B. - Dallas, TX
    #76 RX-7 2nd Gen
    SCCA EP
    Former ITS, ITE, NASA PT

  3. #3
    Join Date
    Jan 2001
    Location
    Buffalo, New York
    Posts
    2,942

    Default

    Recaro

  4. #4
    Join Date
    Jan 2003
    Location
    Los Lunas, NM, USA
    Posts
    682

    Default

    Clydesdale?

    I'm 6'-04" 235 lbs. Had an older Cobra tube frame and hated it. It was so narrow the tubes would bruise my hips, so I sold it to a skinny guy.

    I now use an Ultrashield Pro, 17" IIRC. If you get an aluminum seat that's too big you can always make some foam inserts to put under the cover. If you get one that's too small you're pretty much SOL.
    Ty Till
    #16 ITS
    Rocky Mountain Division
    2007 RMDiv ITS champion

  5. #5
    Join Date
    Apr 2001
    Location
    Orlando, FL
    Posts
    185

    Default

    Clydesdale? [/b]

    Clydesdale is a division in Triathalons for men over 225 lbs. Athenas is the women's equivalent and their minimum weight is 150lbs.

    Thanks for the responses. Keep them coming.
    Hammer
    CFR
    ITA Nissan 240sx #56
    2009 Nissan GTR
    2010 Nismo 370z
    http://www.ReedNissan.com/

  6. #6
    Join Date
    Apr 2003
    Location
    Sterling, VA
    Posts
    734

    Default

    LOVE my Kirkey Intermidate Road Race set. There is a Road Race seat and there is a Intermedate also so beware.

    5' 10" 200 lbs Honda Civic

    2 other drives purchased also one in a Civic one in an Integra, working on trying to convince Yip in his Golf since he liked it so much when we did the enduro.
    Spanky | #73 ITA 1990 Honda Civic WDCR SOLD | #73 ITA 1995 Honda Civic WDCR in progress |
    ** Sponsored by J&L Automotive (703) 327-5239 | Engineered Services, Inc. http://www.EngineeredServices.com **

    Isaac Rules | Build Pictures

  7. #7
    Join Date
    Aug 2005
    Location
    Austin, TX
    Posts
    150

    Default

    I love my Ultrashield Pro Road Race with Halo. Mine is a standard size, but they can make you a custom one for less than the price of a composite. The seats are well made with lightweight sections and thick aluminum reinforcements and good foam on the halo section. Before this I ran a regular ultrashield road race (no halo)...No way I can go back to racing without a halo. Some of the newer composite seats with halos look great too and the prices are not outrageous. They just weigh a little more than the aluminum seats. For my taste, nobody has been able to answer me minimum clearances needed for a composite seat to allow for flex...and the Miata is so small that really there isn't room to flex, so I prefer controlling the stiffness with a brace instead.

    Antonio--used to be a clydesdale but knocking down the pounds.

  8. #8
    Join Date
    Jan 2003
    Location
    Los Lunas, NM, USA
    Posts
    682

    Default

    Mine is a standard size, but they can make you a custom one for less than the price of a composite. [/b]
    Not sure I understand what you mean be a 'standard size'. Ultrashield Pro seats come standard in one inch increments from 14" to 18" in either 10 or 20 degree layback. The lighter deluxe version comes in the same range, except in one-half inch increments.

    The 17" width is a bit loose on me, as soon as I get more pressing things taken care of I'll make some foam inserts for under the seat cover.

    Antonio--used to be a clydesdale but knocking down the pounds.
    [/b]
    I was at 260, now down to 235, but not in danger of leaving the Clydesdale ranks anytime soon.
    Ty Till
    #16 ITS
    Rocky Mountain Division
    2007 RMDiv ITS champion

  9. #9
    Join Date
    Aug 2005
    Location
    Austin, TX
    Posts
    150

    Default

    Sorry I should have said off the shelf. Mine is a 16", used to fit me great, but I Think it's getting a bit loose on the sides.

    Ultrashield does full custom as well as part custom. In other words, you can get an off-the shelf seat in most dimensions, but if you're tall you can ask for the shoulder harness holes to be moved...or you can go full custom. Be prepared to wait for your seat though, they are in high demand.

  10. #10
    Join Date
    May 2003
    Location
    Lagrangeville, NY
    Posts
    694

    Default

    <-------- 6&#39;-4" 290.
    Chris Raffaelli
    NER 24FP

  11. #11
    Join Date
    May 2003
    Location
    Colchester, CT, USA
    Posts
    2,120

    Default

    After having a Recaro, I will never use anything else. I&#39;m not sure if they offer different widths, but it fits me like a glove (6&#39;, 175). With other seats I was constantly tugging on the belts trying to keep them tight or tighten them more. With the Recaro, I pull them once at the 1 minute mark and forget them!!

    Jeff L

    ITA Miata



    2010 NARRC Champion

    2007 NERRC Championship, 2nd place
    2008 NARRC Championship, 2nd place
    2009 NARRC Championship, 2nd place

  12. #12
    Join Date
    Jan 2001
    Location
    New York, NY, USA
    Posts
    451

    Default

    I have a Sparco Circuit. Fits like a very tight glove. I love it. The XL version is, uh, xl ;-)

    Here are the variations on the theme:

    http://bildon.com/catalog/DetailsLis...00892FBS&Nav=9
    http://bildon.com/catalog/DetailsLis...00894FNR&Nav=9
    http://stable-energies.com/prodinfo....er=REC-PRORACE
    Scroll down for Sabelt Taurus - http://teamdi.com/sabeltseats.html

    Dave Z


Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •