27 mm rear sway bar for 91 CRX

**ITC007** · 03-29-2007, 01:01 PM

Anyone have one for sale or know where I might be able to find one?

**R2 Racing** · 03-29-2007, 01:25 PM

Anyone have one for sale or know where I might be able to find one?
[/b]

Does a CRX even need a 27mm rear sway bar? Good lord, I hope you're not talking about a solid 27mm bar.

What was on the car before? Have you got the chance to drive it yet?

**Domino** · 03-29-2007, 01:37 PM

Just an aside...why go with a 27mm? If you need something that large then you really need stiffer springs. I have a 22mm (7/8") Suspension Techniques adjustable and it's more then enough. Got it from OPM a while back. 22mm is much easier to come by.

**ITC007** · 03-29-2007, 03:22 PM

it was passed on that that is the way to go, but it could be cheaper to run different springs. I have the stock SI bar on it right now.

**R2 Racing** · 03-29-2007, 04:13 PM

I'll agree with Mark here. Get the 22mm Suspension Techniques bar as that should be more than enough for a CRX - plus it'll be a direct bolt in application. (I use to have one custom mounted on my Integra at one time and it worked ok on that car, and it has a much longer wheelbase. Too bad, I just sold it.) If you need more than that, than you need to be looking at springs.

**iagreen** · 03-30-2007, 04:51 PM

It's no 27, but this is the 24 I run.

Progress 24mm RR bar

**Xian** · 03-31-2007, 07:22 PM

Just an aside...why go with a 27mm? If you need something that large then you really need stiffer springs. I have a 22mm (7/8") Suspension Techniques adjustable and it's more then enough. Got it from OPM a while back. 22mm is much easier to come by.
[/b]

x2

If you need more rear roll stiffness than a 22mm bar can give you then I'd suggest going higher in rear spring rate.

Christian

**H5Civic** · 04-01-2007, 10:45 PM

I have both a 22mm ST bar as well as a 24mm Progress bar, both of which are no longer being used, either of which I'd be willing to sell.

PM me or shoot me an email, [email protected].

Regards,

Sam

**reddog_es22** · 04-03-2007, 06:58 PM

New ASR bar undergoing testing ...

http://www.rr-ax.com/bbs/forums/thread-vie...osts=12&start=1

**ITC007** · 04-04-2007, 12:19 PM

Checking into all of this, and reserching some spring rates.
Thank you all for your time.

Thread: 27 mm rear sway bar for 91 CRX

Thread Tools

Search Thread

Display

Bookmarks

Bookmarks

Posting Permissions