hey if someone could post or pm a lap or two around the pocono scca course i would really appriciate it.
thanks
hey if someone could post or pm a lap or two around the pocono scca course i would really appriciate it.
thanks
Matt Rooke
#16 ITS RX7
#16 ITR BMW
NNJR
www.scca-nnjr.com
www.theDevilintheDark.com
www.ProITSeries.com
www.ScuderiaZissou.com
www.RidgeSpeedRacing.com
There are a number of Pocono layouts used by race clubs; North, East, South and Long (and maybe another...I forget).
Go here (Google Video) and you can find lots of them:
http://video.google.com/videosearch?hl=en&...m=1&sa=N&tab=wv
----------------
~#11 Spridget Race Pix~
~#909 Escort GT Race Pix~
http://img.photobucket.com/albums/v1...abe_sprite.jpg
----------------
http://www.mylaps.com/results/showevent.jsp?id=132872
Matt, there are the results from the 2006 race. The past 3 years have been static as far as the course that NNJ runs. Clockwise using the T4 infield out to Devil's Elbow - to a chicane at the exit of T2 and then all the way past start/finish. This is a lap using the config...it's basically a 5 turn autox then 2 HUGE straights interupted by a chicane.
http://www.youtube.com/watch?v=I0Bt7j0Q-Pg
Andy why did you post such a boring video? I think this one is a little more exciting.
http://www.youtube.com/watch?v=gir0-c2tchE
Crazy Joe
#01 ITA
Nissan Sentra SE-R
www.kakashiracing.com
[email protected]
www.kesslerengineering.com (Matt's the man)
First non CRX at IT Fest 2009 2nd place overall
2008 ITA NARRC & NYSRRC Champion
One on my favorite races ever was with Jeff Harding at Pocono last year - came from the back of the field to the front and traded 3rd with Jeff - bump drafting and going over 140 mph in the Mazda was just fantastic - and its nice when you are compfortable enough with the other drivers to do that stuff. I just looked at my in car video again - Jeff - if you want to check it out send me a note and I'll mail it to you. Ya got me for third
BenSpeed
#33 ITR Porsche 968
BigSpeed Racing
2013 ITR Pro IT Champion
2014 NE Division ITR Champion
It was a fun race. I have some video of me giving you a little help out of the chicane.One on my favorite races ever
[/b]
Crazy Joe
#01 ITA
Nissan Sentra SE-R
www.kakashiracing.com
[email protected]
www.kesslerengineering.com (Matt's the man)
First non CRX at IT Fest 2009 2nd place overall
2008 ITA NARRC & NYSRRC Champion
Hey I think we run in the same group this year!!!!! I can be yur draftin partna!!!!!!!!It was a fun race. I have some video of me giving you a little help out of the chicane.
[/b]
John Costello
2009 Northeast Division T3 Champion
2010 Northeast Division T3 Champion
King Motorsports
Hoosier Tire
Chase Cam
Redline Oil
YEA YEA YEA......I sold out and now drive an SM and get schooled on a regular basis!
It was a fun race. I have some video of me giving you a little help out of the chicane.
[/b]
Hey Joe - mail me that video! It would be cool to see the RX7 in action. I understand it is running up front in the SE Div down in Florida these days. Still dynos at 180 according to the father and son team who bought it.
BenSpeed
#33 ITR Porsche 968
BigSpeed Racing
2013 ITR Pro IT Champion
2014 NE Division ITR Champion
Ben,
Not to hijack the thread, but how is the Fiero coming along and when do you see having it on the track?
Bill Etherington
NNJR Tech
Yo Bill - Fiero is coming along nicely - got it making some very good power with additional development being done on the exhaust. Still haven't put in the cage but that is looking like May/June. All other parts have been assembled for total conversion. Trick suspension has been purchased but using some older Koni reds that I hope will do one season but the rest of the setup is good. Now that it's getting warmer I'll be wrenching more. Gotta have you over for the annual tech - I'll call ya.
Try looking up Pocono on YouTube (or any other track for that matter) - I know you can find some Pocono video there. While you're at it - look up Spa and Eau Rouge - some amazing in car stuff.
Bookmarks