looking for some pocono video

[rsx858]

hey if someone could post or pm a lap or two around the pocono scca course i would really appriciate it.

thanks

[aeronca65t]

There are a number of Pocono layouts used by race clubs; North, East, South and Long (and maybe another...I forget).

Go here (Google Video) and you can find lots of them:

http://video.google.com/videosearch?hl=en&...m=1&sa=N&tab=wv

[Andy Bettencourt]

http://www.mylaps.com/results/showevent.jsp?id=132872

Matt, there are the results from the 2006 race. The past 3 years have been static as far as the course that NNJ runs. Clockwise using the T4 infield out to Devil's Elbow - to a chicane at the exit of T2 and then all the way past start/finish. This is a lap using the config...it's basically a 5 turn autox then 2 HUGE straights interupted by a chicane.

http://www.youtube.com/watch?v=I0Bt7j0Q-Pg

[dominojd]

Andy why did you post such a boring video? I think this one is a little more exciting.

http://www.youtube.com/watch?v=gir0-c2tchE

[Andy Bettencourt]

Horsepower rules!

[benspeed]

One on my favorite races ever was with Jeff Harding at Pocono last year - came from the back of the field to the front and traded 3rd with Jeff - bump drafting and going over 140 mph in the Mazda was just fantastic - and its nice when you are compfortable enough with the other drivers to do that stuff. I just looked at my in car video again - Jeff - if you want to check it out send me a note and I'll mail it to you. Ya got me for third

[dominojd]

One on my favorite races ever
[/b]

It was a fun race. I have some video of me giving you a little help out of the chicane.

[jcmotorsports]

It was a fun race. I have some video of me giving you a little help out of the chicane.
[/b]

Hey I think we run in the same group this year!!!!! I can be yur draftin partna!!!!!!!!

[benspeed]

It was a fun race. I have some video of me giving you a little help out of the chicane.
[/b]

Hey Joe - mail me that video! It would be cool to see the RX7 in action. I understand it is running up front in the SE Div down in Florida these days. Still dynos at 180 according to the father and son team who bought it.

[wdether]

Ben,
Not to hijack the thread, but how is the Fiero coming along and when do you see having it on the track?

[JimLill]

http://www.trackpedia.com/wiki/Pocono_Inte...l_Raceway#Video

[benspeed]

Yo Bill - Fiero is coming along nicely - got it making some very good power with additional development being done on the exhaust. Still haven't put in the cage but that is looking like May/June. All other parts have been assembled for total conversion. Trick suspension has been purchased but using some older Koni reds that I hope will do one season but the rest of the setup is good. Now that it's getting warmer I'll be wrenching more. Gotta have you over for the annual tech - I'll call ya.

[PAFR7]

Try looking up Pocono on YouTube (or any other track for that matter) - I know you can find some Pocono video there. While you're at it - look up Spa and Eau Rouge - some amazing in car stuff.