I used the stock window and stripped it of all its hardware. I then attached a piece of sheet metal to it and measured down along the bars where the hardware attaches and put in two bolts. From there I drilled two holes where I wanted the window to ultimately sit when in place. I then put a larger hole below that would clear the head of the bolts and cut a slot connecting the two holes. I now have the stock window in that can be removed when I get to an event. Unlike making a lexan window I do not need to use bungee cords or tape to get it to seal properly.
Zephyr
LoBuk ITB CRX Si
2007 NASA H5 National Champion
2006 NASA H5 National Champion
2005 ECHC H5 Champion
Bookmarks