Is it legal to remove the steel angle that is bolted behind the front seats of the '97 Civic. If it is it will be removed and replaced with a low horizontal tube in the main hoop.
Matt
Senior Member
Is it legal to remove the steel angle that is bolted behind the front seats of the '97 Civic. If it is it will be removed and replaced with a low horizontal tube in the main hoop.
Matt
Senior Member
Do you have a pic? Is it a part of the seat mounting? If it's just something that the seat mounts to I think you would probably be ok removing it. If it's a part of the unibody, then I'd say no.
Christian
Christian in FL | Something white with Honda on the valve cover...
FASTtech Limited- DL1, Schroth, & Recaro Goodness
LTB Motorsports- The Cheapest Place for Momo
TrackSpeed Motorsports- OMP, Racetech, & Driver Gear
Senior Member
It is the steel that is bolted across the full width of the car right behind the seat.
Senior Member
as long as:
1.) it is to facilitate the installation of safety equipment (roll cage etc)
2.) If it is part of the roll cage you are allowed 8 points of attachment.
Evan Darling
ITR BMW 325is build started...
SM (underfunded development program)
SEDIV ITA Champion 2005
sometimes racing or crewing Koni Sports Car Challenge
Senior Member
I think we need a picture. I would be VERY careful in removing items 'to facilitate cage install', especially optional tubes. PICTURES!!!
Posting Permissions
Reply With Quote
Bookmarks