Quote Originally Posted by Tom Blaney View Post
It's all about preperation, the little details will kill you. One thing I learned is to check the installation of each part as you go it save a lot of steps backward

Your are totally correct. Attaching the clutch cable was the last thing on my check list before I turned the key. I jumped into the light instead of walking to it. All I needed to do was give the adjustment screw a few turns and move the bevel washer to the other side of the lever. All good.

There were high fives going around when that engine started up. That was a big chore for the untrained. Doing 98% of it solo took about 30 hours. I didn’t really run into big problems other than some very stubborn bolts in the exhaust. Getting the engine back into the bay was a bit of a chore. The passenger side mount and front mount could have been designed a bit different to allow a bit more room to drop the engine in.

I feel like the next time I have to do engine work, I will not be intimidated.

One thing I learned…don’t fill up the tranny until the axles are back in….ask me how I know.