-
got my BSI bolt in camber plates(sorry bill..will upgrade to yours when available) today and am going to try and install this weekend. Any tricks,do's and dont's.
Dennis
Indianapolis
-
Can you measure caster at home? If you can then it is labor intensive, if not a good alignment shop or body shop is needed. You really need to get the caster right or you will fight the car. Example: my BSI weld in plates (16V Golf) took 12 hours to install with a alignment machine and a MIG. I ended up with exactly 4 deg positive caster on both sides and it has stayed that way for five years of racing.
Jon
-
Dennis
Indianapolis
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks