Page 2 of 2 FirstFirst 12
Results 21 to 27 of 27

Thread: My eyes! Pig rich 260Z - adjustments?

  1. #21
    Join Date
    Jan 2003
    Location
    Los Lunas, NM, USA
    Posts
    682

    Default

    Do you have a web site, Joe? Or can you tell us how to reach you?


    ------------------
    Ty Till
    #16 ITS
    Rocky Mountain Division

  2. #22
    Join Date
    Oct 2001
    Location
    Oregon City OR.
    Posts
    1,550

    Default

    [email protected]

    503-650-9548 M-F


  3. #23
    Join Date
    Feb 2001
    Location
    Atlanta, Ga
    Posts
    631

    Default

    Just adding this; If you can start the car without the choke when cold, then you are way too rich. Don't remove the choke cables, if you are set lean enough to make better power (but not burn up), you will need the choke to start the car.

    Get rid of the EGT's as they are unreliable and work with o2 sensors to monitor the temps. Lean=power until too-lean=meltdown.

    Tom Donnelly
    ITS 240z

  4. #24
    Join Date
    Feb 2001
    Location
    Atlanta, Ga
    Posts
    631

    Default

    I just noticed the comment about Strombergs. I tried for a few years to get 2 Strombergs to work on a TR-6. They always ran just a little rich.

    Tom

  5. #25
    Join Date
    Jul 2004
    Location
    Raleigh NC
    Posts
    3,682

    Default

    Get rid of the EGT's as they are unreliable and work with o2 sensors to monitor the temps. Lean=power until too-lean=meltdown.

    Tom Donnelly
    ITS 240z[/B]
    I'd disagree with this one - I use EGTs on the plane to properly lean/enrichen the mixture when I fly and it is SOP on 100,000's of aircraft all over the world. They work, but I maybe you mean in your experience the gauges/probes get broken a lot?

    Yes, it is way rich. It'll start with no choke in 30F weather. Boom, fires right up and then of course smells like gas.

    Ron

    ------------------
    Ron Earp
    http://www.gt40s.com
    Ford Lightning
    RF GT40 Replica
    Jensen-Healey ITS
    My electrons don't care if they flow through OEM wires, do yours?

    [This message has been edited by rlearp (edited February 04, 2005).]

  6. #26
    Join Date
    Feb 2001
    Location
    Atlanta, Ga
    Posts
    631

    Default

    Ron,

    I guess it is in my experience. I'm not sure if its the probes or the guage. What happens is sporadic readings on the guage or no reading at all. This could be wiring problems but the car isn't British. I've received similar feedback from other drivers.

    Tom

  7. #27
    Join Date
    Jul 2004
    Location
    Raleigh NC
    Posts
    3,682

    Default

    Well, I'll be dipped in sh&T.

    Gauge 1 on the car reads a blinking 000! Now, that never happened to me when I was flying, what is up? Are these car EGT gauges crap?

    In theory they would be perfect to tune a car, but, if they don't work I suppose I can't use them can I?

    Off to the garage to sort this one out....

    Ron

    ------------------
    Ron Earp
    http://www.gt40s.com
    Ford Lightning
    RF GT40 Replica
    Jensen-Healey ITS
    My electrons don't care if they flow through OEM wires, do yours?

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •