I just finished installing my suspension bits with the new spherical installed. Everything went together just fine. The travel on the front suspension is smooth as silk, but the rear is super tight. I didn't have my factory shop manual with me for proper torque specs, and even if I did those specs would be off since the bushings are metal instead of rubber now, so I just cranked them down really tight (arm tight with 1/2" drive).
The rear suspension doesn't really move. Will this change when 2300lbs of 240sx loads it up, or should I maybe loosen the rear suspension bolts a bit?
Those with sphericals in their 240, was your rear suspension really tight too?


Thanks,
Tim

...still waiting on the motor