fuel port

[dpc]

I am running a 240sx with a fuel cell, help where do I put the port. any ideas out there.

[bill f]

One solution to the Fuel Port Access problem is listed on the Home Page of www.asedan.com, made by a company called Jiffy Tite. All aluminum, with both ends sealed when disconnected, and they come in a varity of ends (barb, SAE, Holley inlet threads, etc), and sizes. I have them in my ITB car, and recommend them. They are not the only solution available, and do cost a few bucks, but they are sanitary, safe, and convient.

Let me know if you have trouble locating them. I do not sell them, just use them.

Good racing. Bill
[email protected]

[bill f]

One solution to the Fuel Port Access problem is listed on the Home Page of www.asedan.com, made by a company called Jiffy Tite. All aluminum, with both ends sealed when disconnected, and they come in a varity of ends (barb, SAE, Holley inlet threads, etc), and sizes. I have them in my ITB car, and recommend them. They are not the only solution available, and do cost a few bucks, but they are sanitary, safe, and convient.

Let me know if you have trouble locating them. I do not sell them, just use them.

Good racing. Bill