Tech question

[29 ITS NER]

I'm in the final stages of getting my car ready for 4/2 annual tech at Shine. As this is my first car, I need some help on location for the fuel sampling port and if there is a specific location for the transponder.

TIA,

domenic

[chuck baader]

I put my transponder in the hole left by the air conditioning dryer...bent a piece os metal and attached the t'ponder about a foot off the groung...good point as there is no metal under it.

Sample port is a high pressure hose "T" off the return line and ty-wraped in position along the left front fender. Mine will extend past the fender a good foot when loosened. Don't want to be sampling gas in a hot engine compartment. Chuck

------------------
Chuck Baader
#36 ITA E30 BMW
Alabama Region Divisional Registrar

[Willisbe]

Go to fuelports.com, Paul makes his own fuel ports and makes a hose that attaches to the fitting to sample the fuel outside the car.

Jeremy

[Andy Bettencourt]

I have an extra high-end Test port set up if you are interested...

andybettencourt AT hotmail DOT com

AB

------------------
Andy Bettencourt
New England Region, R188967
www.flatout-motorsports.com