Results 1 to 6 of 6

Thread: third member falling out?

  1. #1
    Guest

    Default third member falling out?

    heres one for the books, last race at BWRP on the fourth day on the track for my car it developed a vibration at around a hundred mph that would stop when I backed out of the throttle, end of the day sunday I noticed a little golf ball sized puddle on the ground under the rear end. got it up on stands this morning and all the third member bolts were either half backed out or starting to, front of my fuel cell was coated with gear oil and you could see the oil trails across the bottom of the cell and the rear ends dam near empty. hey Basil, once again my rx7 does a excellent imitation of a brittish car. lol anyway, has anyone had this happen to them?

    Daryl

  2. #2
    Join Date
    Apr 2001
    Location
    Hubbard, OH, USA
    Posts
    260

    Default

    I didn't get the vibration thing but during the first track day of the year this year, I too was spraying oil all over my gas tank and every one of my bolts were loose. I have not touched those bolts for two years since I installed the gears. It has now been added to my offseason check list

  3. #3
    Join Date
    Apr 2001
    Location
    Hubbard, OH, USA
    Posts
    260

    Default

    Now that I think of it I did make a mental note to check the lock washers on those bolts but never did, guess I got something to do this weekend after all.

  4. #4
    Join Date
    Feb 2001
    Location
    Wauwatosa, WI, USA
    Posts
    2,658

    Default

    Daryl, you got your sites mixed up. Do you think Basil would (Please excuse me folks)#ower himself to the IT site?

    Back to your subject, sometime back I found the rear end bolts loose on my 1st gen & posted a message about the subject. Common issue to many. It had been a while since I paid attention to those bolts. Found a drip or two on the garage floor.

    Have Fun
    David

  5. #5
    Guest

    Default

    hi David, yea he does pop in here occasionally, I think he type's in his name in the search colum to see who's talking s--t about him. had a great time at BWRP a while back, put my results in the pacific region section of this site in "advice for a new road racer".

  6. #6
    Join Date
    Feb 2002
    Location
    Ankeny, Iowa, USA
    Posts
    81

    Default

    Mine comes loose every year or so. I fix it by with taking out all the bolts, shifting the pinion piece forward, putting red sealer in and resealing it. Seems to be good for one season (5 or 6 weekends). It will start loosening again the next season. Anyone know of any longer-term fixes?

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •