Originally posted by Richy Gonzalez:
Sorry guys for not being be able to check this post for a while but here it goes.
First - Thanks for compliments on the cage. While I don't have the best components in my car, I do have the best cage money can buy. Well, that short of a Audi WC car
Seat - My seat has an FIA rating therefore it doesn't require a back brace.
Triangular tubes - They do not have a separate mounting location and are welded within other tubes. GCR says you can have as many tubes as you want as long as you only have 8 mounting sections to the body.
Dash part/heater control - They have been removed because of my "knee bar". It runs right where it gets mounted. Now, I could go through the trouble of cutting the factory dash piece to fit it back in but I don't think is necessary. If I didn't have a knee bar, then I would argue of removing it for no reasons.
Door panels - I can't remember if they the rule which states you must leave them in is still in affect. I've seen a lot of IT cars with and without them and without an aluminum panel either. While I have my panels in my shed, they are not in the car. If this is a problem, I would be more than happy to put them back in.
PS: Did I mention that I'm 6'2'', 245lbs in a CRX. And yes, I'm not anything close to minimum weight
Bookmarks