Results 1 to 2 of 2

Thread: OPM Camber plates

  1. 05-15-2002, 12:30 AM #1
    RacingRosey
    RacingRosey is offline Junior Member
    Join Date
    Oct 2001
    Location
    Outside of Raleigh, NC
    Posts
    10

    Default OPM Camber plates

    I installed a set of these on the front of my 86 CRX Si. I left the metal dust boot covers over my tokico adjustable shocks, and put the supplied spacer on top of that. Everything went together solid, but I have some interesting noises coming from the front now. ?? I'm wondering if leaving the covers on there is causing it.

    On another note, the driver side is adjusted all the way out, and only gave my 1 degree of negative camber. The passenger side is only 1/2 of the way adjusted for the same amount. I guess My car has had some damage in it's life.

    thanks for the input!

    Reply With Quote Reply With Quote
  2. 05-21-2002, 11:23 AM #2
    cbstd
    cbstd is offline Junior Member
    Join Date
    Mar 2002
    Location
    Los Angeles, CA
    Posts
    23

    Default

    I also have the OPM camber plates on my '87 Si. The noise is coming from the plates. I put a thick rubber washer at the top of each strut (just below where it attaches to the camber plate) to absorb the noise.

    Scott
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules