Results 1 to 3 of 3

Thread: honda civic hb

  1. #1
    Join Date
    Mar 2002
    Location
    wausau, wi
    Posts
    9

    Default honda civic hb

    i have a spare 91 honda civic body and was wondering where to start. im looking at itc. also, will i run into any probs with tech because i used to have a dx 1.5 5-speed in there, but because of its accident history, its sort of a pile of parts put together...no si stuff and im swapping in the spec 4speed 1.5 for itc...anything to watch out for...or tips??? need help, thanks.

  2. #2
    Join Date
    May 2001
    Location
    IT.com "First Loser" Greensboro, NC USA
    Posts
    8,607

    Default

    The 88-91 Civic HB is listed in ITC but you need to be VERY sure that the collection of parts that makes it to the track (including the VIN number) are all from Hondas of that vintage and of the specification original to the ITC-listed model of that car.

    You may have already done this but, if not, order a copy of the GCR (rules book) before you spend any more $$. If you are starting with something that isn't "all there" it might be an expensive proposition to get it back to original specs, so proceed accordingly.

    Best wishes with the project!

    Kirk


  3. #3
    Join Date
    May 2001
    Location
    San Jose, CA, USA
    Posts
    456

    Default

    yes !! Same as above! Get the GCR. basically the car must be using the original spec parts.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •