a-1 alignment

[mike_a-1gti]

Anybody out there have any suggestions for front-end alignment on a-1 GTI running Hoosier R3s03. Please ,any good info to start with will help.:

------------------
Mike M.

[Bill Miller]

I run 1.5 deg. of neg. camber and 1/16th toe out. I run the same rear camber and 1/16th toe in.

------------------
MARRS #25 ITB Rabbit GTI
SCCA 279608

[Scirocco#28]

Hehe, ok I'll add my setup because its a little different, on the front anyway. I run 3.25 neg on the LF and 2.25 neg on the RF. I run zero toe. The car wants to track a lot I find on straights with my locked diff if I run toe out. On the back I have 2.5 neg on LR and 1.75 on the RR, with a 16th in as well.

------------------
87 ITB Scirocco
HighSpeed Motorsports

[GTI Cup]

3 degrees neg camber with 1/16th toe out in front, 1.5 neg camber and 0 toe in the rear.

------------------
Glenn
MARRS ITB #07

[Bill Miller]

Glenn,

Please email me, [email protected]

------------------
MARRS #25 ITB Rabbit GTI
SCCA 279608