Results 1 to 5 of 5

Thread: Quaife'sand tire ware

  1. #1
    Join Date
    Jul 2001
    Location
    Scranton, PA
    Posts
    33

    Default Quaife'sand tire ware

    I have had a Quaife installed and after
    Two solo 1 events and two solo 2 events
    I have alot of wear on the drivers side
    and very little on the otherside.
    Is this normal wear?

  2. #2
    Join Date
    May 2001
    Location
    IT.com "First Loser" Greensboro, NC USA
    Posts
    8,607

    Default

    Is this on a clockwise or counter-clockwise track (or tracks)? Is that likely to have been a factor?

    Kirk

  3. #3
    Join Date
    Jul 2001
    Location
    Scranton, PA
    Posts
    33

    Default

    both ways.
    the wear on the driversside is 3x that on the
    right,

  4. #4
    Join Date
    Mar 2001
    Location
    vernon,CT. U.S.
    Posts
    152

    Default

    Spike,
    I would be looking at something other than your diff for tire wear like that. What kind of negative camber are you running?
    How about toe?
    drew

  5. #5
    Join Date
    Jul 2001
    Location
    Scranton, PA
    Posts
    33

    Default

    I was going to check toe & camber this weekend.
    But when I set up the car I had 1/8 total
    toe out and 2.5* camber.
    I thought about that at first but after looking at the amount of wear and the amount
    of use I think there might be something wrong with my Quaife.
    It's as I only have one wheel drive.

    Thanks for you help
    Spike

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •