Results 1 to 9 of 9

Thread: Toyota MR2

  1. #1
    Join Date
    Jun 2004
    Location
    albuquerque, nm, usa
    Posts
    4

    Default Toyota MR2

    Hi all,
    I race an '85 MR2 in ITA. Yes, I know it's not the best car for the class. She is not the best prepared racecar out there, either.
    Stock springs with 1 coil cut out, Tokikos, tired stock motor with over 100k miles. Oh, yeah, I race on Falken Azenis, 'cause they're cheap! Last year I got one 3rd, two 2nds, and one 1st (over a really well-built CRX on Kuhmos!).
    I am seeking advice on spring rates, and any sources of aftermarket parts for this car, esp. camber plates, rear end gears...

    Thanks, cya racin'

  2. #2
    Join Date
    Jun 2002
    Posts
    62

    Default

    if you're finishing top 3 every race in an MR2 then don't change a thing!
    Lots of good info at www.mr2oc.com there's a few ITA racers there and a few Prod racers too.


  3. #3
    Join Date
    Jun 2004
    Location
    albuquerque, nm, usa
    Posts
    4

    Default

    Thanks 4 the info. I must admit that those finishes were out of 3-4 car fields. Not a lot of ITA cars in RMDiv.

  4. #4
    Join Date
    Oct 2003
    Posts
    120

    Default

    I just finished building an MR2 for ITA. The owner races it in the MIDIV. I have tons of pics showing the struts I made, camber plates, fuel cell, cage, Advance Design strut inserts etc. Post or send me your email and I'd be happy to send them (the pictures, not the parts ) to you.

    ------------------
    Nico
    KCRaceware (816) 257-7305
    [email protected]

    [This message has been edited by theenico (edited June 15, 2004).]

  5. #5
    Join Date
    Nov 2001
    Location
    Kensington, CT, USA
    Posts
    1,013

    Default

    Check out my site - www.racerjake.com

    I built my car a few years ago too. I'm also on the road race section of www.mr2oc.com We'll answer any ?'s you got.

  6. #6
    Join Date
    Oct 2003
    Posts
    120

    Default

    Jake,

    I sent you some pictures of the MR2 I just finished

    ------------------
    Nico
    KCRaceware (816) 257-7305
    [email protected]

  7. #7
    Join Date
    Jun 2004
    Location
    albuquerque, nm, usa
    Posts
    4

    Default

    Thanks for all your help, guys.


    [This message has been edited by monkeyboy (edited June 21, 2004).]

  8. #8
    Join Date
    Mar 2002
    Location
    Black Rock, Ct
    Posts
    9,594

    Default

    Hey Monkeyboy...in the future, my opinion is that it would be better for you to contact the person off line first before making a comment like that.

    JMHO

    ------------------
    Jake Gulick
    CarriageHouse Motorsports
    ITA 57 RX-7
    New England Region
    [email protected]

  9. #9
    Join Date
    Jun 2004
    Location
    albuquerque, nm, usa
    Posts
    4

    Default

    Sorry, point taken.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •