Page 1 of 3 123 LastLast
Results 1 to 20 of 44

Thread: STRAW POLL - Wheel diameters

  1. #1
    Join Date
    May 2001
    Location
    Renton, WA USA
    Posts
    1,625

    Default STRAW POLL - Wheel diameters

    I'm just curious, and the other poll is too sidetracked and not specific, so let's try this...


    PLEASE, A simple YES or NO answer will suffice. The question is pretty simple. If you have any feedback or changes you'd want, please e-mail them to me and I'll compile them.

    My E-Mail is: [email protected]


    Would you support the following rule change:


    ALL IT cars currently classified with only 13" wheels are allowed a +1/+2" wheel diameter upgrade.

    All remaining IT cars are allowed a +1" upgrade over their currently allowed wheel diameter.

    Rim width allowance remains the same.

    ------------------
    Darin E. Jordan
    SCCA #273080, OR/NW Regions
    Auburn, WA
    ITS '97 240SX



    [This message has been edited by Banzai240 (edited January 14, 2004).]

  2. #2
    Join Date
    May 2001
    Location
    IT.com "First Loser" Greensboro, NC USA
    Posts
    8,607

    Default

    Yes.

    EDIT - Note that it's extremely unlikely that I would take advantage of this with my current car as well.

    [This message has been edited by Knestis (edited January 15, 2004).]

  3. #3
    Join Date
    Feb 2001
    Location
    Trussville, Alabama, USA
    Posts
    1,087

    Default

    yes

    ------------------
    Chuck Baader
    SEDIV ITS #36 E30 BMW
    Alabama Region Assistant Race Chair, Divisional Registrar

  4. #4
    Join Date
    Dec 2001
    Location
    St. Louis, MO
    Posts
    1,215

    Default

    Yes (and I wrote the CB about it...)

  5. #5
    Join Date
    Sep 2001
    Location
    Charlotte, NC
    Posts
    257

    Default

    yes

  6. #6
    Join Date
    Nov 2001
    Location
    Kensington, CT, USA
    Posts
    1,013

    Default

    yes

  7. #7
    Join Date
    Mar 2001
    Location
    Connecticut
    Posts
    7,381

    Default

    Yes, I would "support" it, as in not oppose it.

    However I did not - and do not plan to - write the Comp Board about it. I've got significantly higher-priority issues in Improved Touring than wheel sizes.

  8. #8
    Join Date
    Mar 2002
    Location
    Black Rock, Ct
    Posts
    9,594

    Default

    Yes

    But I wouldn't take advantage of it.

    ------------------
    Jake Gulick
    CarriageHouse Motorsports
    ITA 57 RX-7
    New England Region
    [email protected]

  9. #9
    Join Date
    Jan 2001
    Location
    Flagtown, NJ USA
    Posts
    6,335

    Default

    Yes, w/ the caveat that max wheel size is limited to 17". (was gonna say 16", but I'll be flexible on this one).

    ------------------
    MARRS #25 ITB Rabbit GTI (sold) | MARRS #25 HProd Rabbit
    SCCA 279608

  10. #10
    Join Date
    Oct 2003
    Location
    long valley, NJ
    Posts
    335

    Default

    NO! KISS (keep it simple stupid) Phil


    ------------------
    phil hunt

  11. #11
    Join Date
    Oct 2001
    Location
    Rancho Cucamonga, CA, USA
    Posts
    1,066

    Default

    No

  12. #12
    Join Date
    Jan 2004
    Posts
    41

    Default

    Yes.

    Rick

  13. #13
    Join Date
    Nov 2001
    Location
    WA
    Posts
    50

    Default

    Yes.

  14. #14
    Guest

    Default

    YES

  15. #15
    Join Date
    Apr 2002
    Location
    Monroeville, PA USA
    Posts
    541

    Default

    YES

    ------------------
    Grandpa's toys-modded suspensions and a few other tweaks
    '89 CRX Si-SCCA ITA #99
    '99 Prelude=a sweet song
    '03 Dodge Dakota Club Cab V8-Patriot Blue gonna tow

  16. #16
    Join Date
    Jun 2002
    Location
    Bushkill PA
    Posts
    813

    Default

    YES

    ------------------
    Crazy Joe
    #7 ITS pilot

  17. #17
    Join Date
    Jan 2001
    Location
    Buffalo, New York
    Posts
    2,942

    Default

    YES

  18. #18
    Join Date
    Mar 2002
    Location
    Fairfield, Ohio, USA
    Posts
    43

    Default

    Yes. Wrote comp board.

    ------------------
    Wayne Briggs
    CenDiv
    ITA Capri
    Building a SM
    Move...Lest Ye Rust!

  19. #19
    Join Date
    Aug 2001
    Location
    kansas city mo
    Posts
    466

    Default

    Originally posted by grega:
    Yes, I would "support" it, as in not oppose it.

    However I did not - and do not plan to - write the Comp Board about it. I've got significantly higher-priority issues in Improved Touring than wheel sizes.

    ditto....this is a Band-Aid on Bigger issues.

  20. #20
    Join Date
    Jan 2003
    Location
    Los Lunas, NM, USA
    Posts
    682

    Default

    Yes

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •