Results 1 to 4 of 4

Thread: 1986 Prelude ECU

  1. #1
    Join Date
    Sep 2003
    Location
    Lima, Ohio
    Posts
    61

    Default 1986 Prelude ECU

    question for all you gurus I found the sourse of my ignition problem fried computer
    can I use an aftermarket or do I have to remain with the stock type?

    what I was looking at was the v-force power control module which is like 100.00 less than OEM computer
    any suggestions

  2. #2
    Join Date
    Apr 2002
    Location
    Bridgewater, MA USA
    Posts
    1,300

    Default

    Yes and no.

    Currently, you can add a chip, flash the memory or completely gut the stock ECU case and add an aftermarket unit.

    This is all provided that any mods you make fit INSIDE the factory ECU housing.

    AB

    ------------------
    Andy Bettencourt
    06 ITS RX-7
    FlatOut Motorsports
    New England Region
    www.flatout-motorsports.com

  3. #3
    Join Date
    Jun 2001
    Location
    Milwaukee, WI
    Posts
    1,193

    Default

    And, it has to use the stock harness plug into the computer case.


    ------------------
    Bill
    Planet 6 Racing
    bill (at) planet6racing (dot) com

  4. #4
    Join Date
    Sep 2003
    Location
    Lima, Ohio
    Posts
    61

    Default

    so essetially yes as long as you are creative enought for it to appear stock

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •