-
Upper Control Arm bushings??
My ITA 83 Rx7 has upper and lower control arms in rear. It only has bushings on lower arms. I hear a very loud banging when I give car gas, shifting ect. I figure the uppers are supposed to have bushings too, but I wanted to make sure if anyone new for sure, or a good place to order them. I just bought the car for drivers school so Im just realizing the problem. Thanks for any info.
-
we need to know how much the rear suspension has been modified. it is common pratice to at a tri link which is a traction control device that attaches to the top center of the diff and runs forward to the body or frame and a panhard rod replacing the stock watts link. if the car has these the upper link bushings have to be removed usually replaced with foam rubber. if you do not have a tri link yeas you need bushings in the upper links.
dick
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks