IT Carburetion flow data

[Mad.Matt]

Hi folks,

I'm a new member to the forum. I just did a search and didn't find anything related to the subject line above. If anyone has a resource on where some figures might be found concerning flow data on the carbs listed in ITCS Pg 7, I'd appreciate it. Email off-line if wanted.

Thanks,

-Matt
Columbus, Ohio

[evanwebb]

Hey Matt, if you get any responses can you put the results up here? I'dbe interested to know... Thanks!

[racer_tim]

It is my understanding, that the Weber 32/36 is the most "popular" within the racing community. It also has the most "tweaks" that have been done, and are available.

Since this carb is the "spec" carb for FF and S2, that there are plenty of them out there, and have become the industry standard for IT.

I don't use one on my FI Rabbit, but that's another story.

[Ascona1973]

I believe I've read that the 32/36 DGV flows 270 cfm, but quite frankly I don't know at what pressure drop that is measured at. One of these days I'll throw one on my flowbench and check to see.

Bob