Search:

Gregg ya kinda lost me on this one??! I have eccentric bushings that press into the stock front wishbone. They're well within the rules. Wish there was an easier way but it is what it is. Got...

I've got a really good interior picture of Derek Bells S60R he ran at Sebring in '05. The right-side net is even a simpson. PM me your email so I can send it to you as it is too large to post it...

x

Where is the info on "MyLaps"?

Is registration up? I looked on the CFR webpage and dlbracing but couldn't find it.

I have yet to see a kevlar seat that was not fully painted like a fiberglass seat. UV damage is essentially zero.

I WAS your exact dimensions when I purchased my seat. A few pounds heavier and it is still fine :rolleyes:

I got the Cobra Imola Kevlar seat from Sube Sports. Great seat, great retailer. I...

You can chip a PM5. It's DIY venture though. Take a look at the link below regarding the DPFI ECU. PGMFI.org is the greatest source of info on Honda ECUs and all the steps necessary to mod them.
...

Check the part numbers.

http://www.hondapartsdeals.com/honda_parts.php

Just an aside...why go with a 27mm? If you need something that large then you really need stiffer springs. I have a 22mm (7/8") Suspension Techniques adjustable and it's more then enough. Got it...

Anyone have any experiences with MFactory Final Drives? $534 seems like a really good deal. Too good maybe. Everything I've priced is in the $900+ range.
...

The link doesn't work for some reason. I think this is the Enzo video. Another link to the video is below.

"The lesson for today kids is.....understeer". Why they would put a conrete barrier...

I cut and pasted this from a post some years back. No need for a resistor.


I wired my car (1990 CRX Si) as such:

Remove the large white wire from the alternator (output wire) and from the...

I saw the same add. The only way to legally integrate Hondata into the CRX is to convert to OBD1 and it requires an OBD0 to OBDI harness and an Integra OBD I distributor and crank angle sensor which...

If you run Blues on all four corners that sounds about right. Running the Blue compound on the rear seems a little overkill for your car IMHO. I'd worry about locking them up with that brake bias. ...

I own "How to Make Your Car Handle" and although it was written in the time period you are trying to avoid, it won't matter. Vehicle dynamics and physics are the same irrespective of the period in...

Just the opposite 6 is more comfortable then a 5. But then again it depends on the belt manufacturer and how they design it. I have the Schroth Profi II and absolutely love it. Quality is...

Eric, I agree with what you are saying, but, the whole flywheel, crank and pulley (lightened or OEM) assembly can be balanced outside of the engine. However, when it's installed and utilized it's...

I read the same thing on Unorthodox's site. I also read something quite humorous on AEM's site (see below). I tend to trust OEM thinking to a point, especially Honda. Why would they put a 6.5 lb...

Anyone have any solid data on the effects/dangers of a lightweight crank pulley? There are so many articles going in both directions. Going from a 6 1/2 lb pulley to a 9 oz is so tempting but not...

Welcome to the CRX club.

Every tech inspector I've spoken with wants to see the seat attached to the car structure not the cage. Personally I have not seen any examples of professional teams mounting to the cage.

You'd be surprised how much metric stuff can be found at Ace Hardware.

It's not a design characteristic to OS in a FWD car but it's sort of where you want to be. Getting the CRX to rotate well is the key. I run 600F and 800R. After a few adjustments I have it very...

Mobil 1 5W30 and Honda filter every weekend.

In a galaxy far far away......a wise Honda engine builder once said......."Use the Honda oil filter only"
...