Thanks for all the help.
I found the problem with the help of a rubber mallet, tapped lightly of course.
It was in the fuse box under the hood, when tapped the fuel injectors began to shut...
Type: Posts; User: yellow41
Thanks for all the help.
I found the problem with the help of a rubber mallet, tapped lightly of course.
It was in the fuse box under the hood, when tapped the fuel injectors began to shut...
Doug & Joe,
Thanks for your help. After the 1st time I thought it might be the fuel cut-off too. I put two snap rings in on top of the button. Next I'm going to re-wire the thing out just to be...
Any help with this one?
Twice last weekend at Summit point my engine shut-off at speed.
Situation - Right hand turn & inability to stay off the outside rumble strips.
--> Engine died...
Jon & Buddy,
Thanks for the good info!
Dave
QUOTE]Originally posted by WIZARD Racing:
Dave, welcome to ITA. I run a 91 EGT in New England Region. You are in a small crowd. Tim (tderrone)...
I'm fine with the 15" part as shown in the GCR.
It's the wheel width I need advice on.
Thanks!
Dave
Hi Glenn,
Thanks for your reply. 1st gen's have a 4x108 bolt spacing, 2nd's are 4x100.
Yes it will be built to SCCA IT specs. I expect to be out mid season 2004.
I'm hoping to use a 15x6.5...
Thanks Joe,
Mine has 15" x 5.5. Can you squeeze a 205 onto a 5.5" rim?
In your experience will a 6.5 wide wheel fit?
Thanks for your reply.
Dave
Hello Escort Racers,
This is my first post & I can use some guidance.
This may not be the best car for it's class but it is the one I have and the one I want to take racing. Currently it's...