I just sold a MK1 IT roller for $600. You missed it!
Type: Posts; User: fornetti14
I just sold a MK1 IT roller for $600. You missed it!
If you're looking for a good IT car I'll be posting a legal ITB Rabbit GTI soon. Not sure on the price - most likely under $4k.
Mid to late '90's vans are all over the U-wrench junk yards too. That helps for fixing the small stuff.
SOLD
I have a set of used Koni Yellow front struts with adjustable compression/rebound. (fronts only - stock valving) These were on a '90 CRX.
$100 takes both. :)
I'll consider a trade on...
My car had an identical problem.
Replaced my gas tank with one from Autozone and presto - life is good again. The autozone tank I picked up has an all metal baffle so it's not going to rot away...
My $145 Autozone gas tank did the trick. My shake down run at Gingerman Raceway went well.
I can run it down to about 1.5 - 2 gallons before it will stall under hard turns (with race tires). I...
Yes, it was an OEM tank and it had the Audi symbol on the side of it. The tank was newer and I think 3-4 years sitting empty rotted out the rubber in the bottom and the pick-up was bad. I knew there...
Thanks for all the posts everyone. Looks like I need to ask my local officials about how they read this rule. In the mean time I'm going to buy a new aftermarket tank to see if I can sort the car...
My Rabbit has a bad OEM tank and I'm looking at fuel cells. The GCR says this:
9.3.26. FUEL CELL SPECIFICATIONS
All cars must be equipped with a safety fuel cell complying with these...
Anyone running a MK1 (Rabbit GTI) with an open diff?
Comments on this idea are welcome.
HI DAVID!!!
There's a big 07 on the car right now! No more fighting for the coveted #14. Good to see you're still out having fun. Just been doing local track days for the past few years... I...
This was perfect!
The crew is driving! I will be a one man show.
New here but have been reading for months. :024:
I have an ITB Rabbit GTI with a kinked metal fuel line where it turns a 90 up into the engine bay. Can I replace that section with a brass 90'...