Thx Bret. Just not quite enough notice... Let us know how the re-repaving has gone...
Jason.
Type: Posts; User: timelapseracing
Thx Bret. Just not quite enough notice... Let us know how the re-repaving has gone...
Jason.
Cutting the wires or leaving unhooked didn't work at all.
You can do the switch to the Auto ecu. Make sure you check base timing, but set your dist, by total advance. The auto ecu will put in...
I would without question replace the pistons. I had a problem with a head - warped cam, which broke the end off in the paddock - almost no load and very low rpm. I stopped immediately - the result...
I just put in the Safety Solutions net - it comes with a ratchet type tie-down to go to the dash bar, and has a quick release to the triangular portion of the net. It went in easy - the Simpson and...
Ditto the flowmaster in the stock location. I never have a problem, it's one of the quieter cars. I added a turndown with a band clamp to redirect depending on the location of sound control....
That's good news... :026: I'd like to see it get on the MARRS schedule too - it's only a little farther from me than Summit Point is.
Jason.
Like I said - everyone has a right to race for positions - but....
NO DOUBT. :D It is on my to do list for the rest of the season :rolleyes: I need to have less drama and lose about 2...
We definitly lost a bit of time battling for position behind the VW while Marshal did a test day. Given that the ITR cars most likely are at the early end of their development cycle, and given the...
During last season I upgraded from -08 to -10 it made a big difference in cooling. -10 is like 25% bigger diameter than -08, it also helps to make sure there aren't constrictions in the lines. ...
Make sure you have a gauge. Add the cooler - make sure the lines are -10 not -08, look for constrictions in the system - I have one at my sandwich adapter fitings, need to bore out and tap for 1/2...
Thanks for the input one and all. I am picking up the right side net for this season and hopefully the seat for next.
Net -
http://www.bildon.com/catalog/DetailsList....-D-C5R-RP&Nav=9
...
Thanks Kirk, Where did you source your net from ... ? How does it disconnect from the firewall strap, is that what the red tether does...?
Jason.
Gregg - I do have a H&N, I was an early HANS adopter - so I'm looking at upgrading my seat this year or next. I have started seeing some seats come out with better head protection, but most are...
Does anyone have recommendations for full containment seats. I currently have a corbeau seat which is great except for the lack of head coverage. I've seen the LaJoie seats - but was looking for...
I thought that was a porta-power... :blink:
Jason.
Earl, I used an older version of this bender - worked really well - though I would have loved one of those fixed platform benders and a really nice shop to put it in... :D
...
Nice thread - a couple thoughts not yet seen.
1. How many prospective kids are there with an import on the street that already have tossed the stock boxes. This is a relatively inexpensive way...
Ditto on the manual and tech info - Just a word of advice - throw away your old head bolts. R&R for the head isn't a bad job - get a piece of wood to wedge in to hold the cam chain from dropping...
I picked up the Team Dynamics Pro-Race 1's. They had to drill them for me, and I have 15mm h&r spacers in front. The rears don't need the extra clearance. The price was right, but I'd rather have...
Earl, You can do it without taking the pan off. The front of the pan bolts to the front cover. The trick is making sure it seals again when you put it back together, and that you don't end up...
"
Damndest thing...... for some reason I forgot to turn it on "
Rob - You know I have a similar - yet sadder story - :035:
MARRS 4 - You remember - the one that wasn't HOT - when Gregg's...
Earl,
At MARRS 1, I did that and the car was almost undriveable. It would go to instant oversteer due to the different levels of grip. I have been since told that if you have mismatched tires,...
- I think the F&C folks thought it was funny to put me at 3 since at MARRS 1 I spun in qual 1, and parked in the gravel needing a tow in qual 2. - They have a good sense of humor. -
- Dori...
It is SOP to not place yourself in a situation where you will be in mortal danger as a flagger. Most/all of the flaggers know that where that car was sitting is in the normal area where cars go when...
Hesitating to get into the discussion at all, I feel there is a different issue mediating all of the facts regarding his egress from the car. Let me first provide the disclaimer - I wear a HANS in...