On all VWs & miatas I have built, I like to mount them to the left of the inst cluster, You can get to it & so can the workers...... the last one I did, I was running out of time and I used a engine...
Type: Posts; User: Lael Cleland
On all VWs & miatas I have built, I like to mount them to the left of the inst cluster, You can get to it & so can the workers...... the last one I did, I was running out of time and I used a engine...
Close, but the camber should be -2.5 to -4.0, and caster should be maxed out.....
:026:Yea the 14is ok but the 7 aint & 10.1 brakes not legal....I wish I could run 13s on my GTI...Do have rear disk conversion also? dose it have a JH engine? or an ABA swap? Ya might want to read...
That's what I did on this miata....Croch/sub belt works well, and it has a date....(02)
So Mitch S rented my Miata, I sold My ITA scirocco to Justin, I have an ITB rabbit, you have a golf, WE will...
Well, the one I just installed is a 1inch web G-force, I tried the mesh/string style, and didn't like it....Safety Racing has a net that has a piece that fills up the A pillar gap if you don't have...
Oh well, my car has a diagional roof bar now......JK...
Sure their not talking about the main hoop diagonal? I am looking at a 2009 GCR.... Beverages do get you a long way...
Like diagonal under the roof? I missed that rule........ Ralf, are you getting your annual tech @ MAM on the 16th?
Edit: Mark Ross drinks budweiser/ Chris S, I dont know what she drinks.....but...
You can run a 205-60-13 (smaller the cheaper)But 205-55-14 is the norm....I love Toyo Ra1s.... love R6 Hoosiers more! I would like to try the hankook z2?? if tire rack could get them in..... V700...
Yea, 16v Sciroccos aren't as easy as 16v golfs...... Make sure the green or white plug is unscrewed from the bell housing. The pointer is on the engine side of the hole, and TDC 0 is a small 0 or...
Search cartalk.com "find a mechanic"Lots of people find me that way!
Mtl!
"I have yet to turn a wheel on track without improvement since starting to use the DL1 system." - Greg, SCCA National Driver
Cool system! If it can make you Purple Crack fast on komho V700s, I am...
I know the LM1 uses a bosch 16 121 sensor....then you just need a 0-2 volt display...
I ordered both bearings, I have seen it in the past were the "BOOK" lies from year to year...The 2000 Audi 1.8T is an old school engine, Non cracked rods, same stroke &bore, It looks just like a 16V...
I have been looking at Main bearing for a JH 1.8L, and at the same time thinking about rebuilding my 2000 Audi A4 1.8T.......The A4 brg # is 06a 198 491 The 16V 1.8L # 026 198 491...
The main...
How would $675 be? I don't know what cars are renting for.......I do it so I can race and feed my family @ the same time...at the track, food is expensive!
Plane tickets are cheep!
I have this 81 scirocco..... no engine.trans....I have an Audi 5speed....and an abundance of engines....2.8L Audi V6......I would love to go mid engine...Track toy..
Possibly formula car front...
HI! Its getting close to the season! In Nebraska region SCCA/MVGR we have 4 weekends & a school!
1988 16V scirocco ITA, fun car, I built it to be a competitive....Then SMs found there way in to...
LOL! easy saftey wireing wing nuts...
I dream of buttons on the dash to push, that make parts change themselves....Like a 1998+ audi/passat rack&pinion swap button!!!!
I use 8x1.25x 35mm 12.8,...
Vice Grips? 200ish...... (in 18 years being in the Biz).....I am liking the safety wire idea.... a cheep V block and a drill press should make it quick....I replace my bolts every other time.Still...
Torque: 14.4v snap-on 3/8s impact! about 6-10 seconds..50% more than the book....I have never had one come loose on the track. Had an Audi Fox, seamed like that car didn't to want to keep the 6 bolts...
God Damn those IT guys! I have rented cars to prod guys, they ran IT and loved it cause they finished the race! When you have a 13:1 grenade under the bonnet, your a better human????
OH YA the windshields! I spent close to a grand one summer on 3 windshields....I would highly recommend using weather stripping and 5 hold downs...We had a glass company install 2nd to last new...
I heard a 85 golf left axle shaft is shorter than a MK1.....`To help with binding....