Search:

Greg I hope you are there, I am just finishing up my tranny, new third gear, got to the point that I didn't know if I had third or not. This left me in some uncomfortable positions. Should be good...

Greg You Don't Need A Tow Hook You Will Be There This Year

Greg, As long as you come with me to race

Greg I didn't see ITA listed as elgible class?

What did they offer last year? KUMHO cut theirs in half.:(

Emailed Rudy C and he stated that it will be the same as 2009:happy204:

Has nayone heard if KUMHO is offering a contingency this Year:(

One other thing you might check is the block to cylinder heigth. I kept going though head gaskets , maching the head until i really checked the block to find out the cylinders were about .004 below...

Have you checked all the wiring harness for bare or frayed wires. What exactly is burnt? Does it run fine until it stops working? If it runs fine and happens under race conditions I would suspect...

This was a newer gearX final but I don't see the relation between a final drive and detent ball? There would be no reason to disassemble the shift forks were the detent balls are located to change...

Looks like it off center by about .090 to .100

http://i890.photobucket.com/albums/ac103/rdj0197/th_MVC-007S.jpg

Actually this problem occured when we put the new clutch and pressure plate in along with the the tranny work?

http://i890.photobucket.com/albums/ac103/rdj0197/mvc-002s.jpg?t=1251925413

http://s890.photobucket.com/albums/ac103/rdj0197/Well we pulled the tranny and noticed a slight miss alignment of the pressure plate to the clutch disc and throw-out bearing. The throw-out bearing...

I'll send pictures when I get down. I know the oil problem first hand as i put main shaft bearing in upside down on main shaft and fried 4/5 after 2 laps.

New forks, new syncro's, the hub was burn't on one side but appears good. The collar that fits between 3/4 gear oil holes were not aligned properly so I put another collar that had alignment holes...

Here is the problem, 5 speed tranny worked fine until I changed final drives from 4.25 to 4.9. We also put in new 1/2 and 3/4 forks, new syncro's on all gears. First time had problem going into...

Sttel Cities always puts on a first class event, friendly people, good food and beer and Beaver Run is a fun track to run, a little hard on equipment but fun.

Rick Jarrett
ITA 88 Honda Civic

Is the Enduro Saturday or Sunday.

Rick Jarrett
ITA 88
Honda Civic

Ran it last year and the field was small I was hoping for a better turnout:(

Hey Greg keep posted on the schedule so I no what time I need to be there Saturday also on the enduro, was looking forward to running it. Do we have any ITA group counts as of yet? I hope we have a...

I have seen them both ways for the same year. I have a set of stock ones with INGALS adjustable ball joints if you are interested. New!

Check the block with a good straight edge. I had the same problem with and went through several head gaskets came to find out the cylinders were actually lower than the block deck. Blocks are easy...