http://www.rx7club.com/forumdisplay.php?f=228
Race Parts Only Classified section.
Type: Posts; User: mbuskuhl
http://www.rx7club.com/forumdisplay.php?f=228
Race Parts Only Classified section.
46125 P205/50R15 84H J 7.1" 23.5" ...
Sparco Pro Adv here. If that's too big, Sparco Circut Pro and if you are really thin, a Sparco Circuit.
Saferacer has a 110% price guarantee. There is also a 10% discount code if you do a Google...
+ 1.
Consider an Accusump with manual valve. Mine releases 3qts at 80PSI (or wherever you close the valve at) into the system before start up every time. I assume you are also using the MFR...
>>> What are the differences between street and race rims?
DOT approval. Street rims must meet specifications established by the DOT and withstand potholes, etc. which require them to use minimum...
Roz was recently discussed on the Prod forums, the USPS says it is illegal to send unsolicited merchandise with demand for payment. Contact your nearest postal inspector, enough complaints and a chat...
x 2 (for stock fenders)
And if you get there with a +35mm wheel and 1/2" spacer which nets 22-23mm all the same thing.
Probably not. A 7" wide 5" BS wheel is +25mm, in theory it should fit...
Next time the car doesn't want to start for you, hook up jumper cables or a jumper box. If it starts after doing this, time to re-do your grounds and make sure you have a good battery.
Only one weekend on R6. 7 sessions - 1 practice, 2 qual, 4 races, all about 15-20 mins. per session. In other words, 2 hours on track. If I am lucky maybe they can be used later for 2 short sessions...
You are talking about the front control arm, rear mount it looks like. The MMR bushings need to be pressed on. They aren't going to crack if you use a press (stay away from hammering). It's a snug...
"SCCA Club Racing" decal replaced with new required "SafeRacer SCCA National Racing Series" decal effective 3/1/2010 for National races, optional for Regional.
Page 75/76
When you get (4) bagged and stickered Hoosier Dirt Stockers 205/50/15 which are NLA for $275 the seller calls the shots.
Got someone to transport for me now.
Need 4 new tires 205/50/15 (no rims) from Oklahoma City, OK 73106 to Dallas, TX area. Seller doesn't want to ship, I don't really want to make the drive. Anyone travelling that route in the next 2...
Take a look here for some inexpensive Delrin/UHMW options - http://www.mmr-direct.com/
There are some threads on this forum about mufflers, check those out. A cheap muffler will burn out the first...
Car - Heacock
Trailer - Allstate
I used the vert wheels before. They fit a 225/45. With the +40 offset you are really going to need a big spacer. In my case that was a good 15mm+ to clear the spring seats. They also don't have the...
Mine is made of furniture grade plywood, covered in resin and removes with 6 pins (no tools required and can be on/off in 2 minutes. Aluminum mounts bolted to the body and splitter along with 2...
I too clicked on the banner advertisement, got my 12 x 1.5 lug nuts yesterday, 17mm hex.
You're going to need special cleaners and polishes for the Lexan. It is very sensitive and easily ruined. Ask me how I know. It won't be a "cheaper" option than going with glass.
As long as rsportvolvo stays in the SOWDIV, there are no competitors to even file protests.
Latest standings have avg. car counts at:
ITA - 6.09
ITB - .36
ITC - .36
ITE - 1.09
ITR - .82...
The real stripper transporter - http://www.race-dezert.com/cgi-bin/trader/atl.cgi?ct=6&md=second&id=1249
Only $45k for all last I checked. Not sure if the Larry Flynt sponsorship is...
Here's a good rotor housing identification chart.
http://www.banzai-racing.com/faq_housings_ID.htm
They are interchangeable.
Is that 3.39 supposed to say 4.30? The GTU's had a 4.30 from my understanding.
No and No. Updating/backdating IS allowed on the spec line. S5 intakes run just fine on S4 harness and AFM. You are thinking of hign and low impedance injectors. Use the S4 injectors with the S4...
1. Yes. Check out www.rx7club.com and search the 2nd Gen Section
2. Can you weld rubber and aluminum? You'll need the new replacement bushing kit. Available in aluminum, Delrin or UHMW
3. Good...