Search:

Can anyone confirm for me if the Kosei K1 racing rim needs to be run with a centering ring on an E36 car? I have a set of 15x7 K1s that are +38mm offset and 5x120 bolt pattern. I sold the car long...

I'm not sure of good suggestions, I have always thought the Zcar system was pretty easy to bleed. On my car I had replaced the system a few times and alwyas had pretty good luck. Sometimes when all...

There is also DP that might work out for an E36. Good to have options.

Someone should buy my E36 I'm selling in the for sale section!

Jeff

Thought I would finally get around to following up on this thread FYI for the guys that said they have seen something similar.

I ended up basically replacing most of the front end parts to be...

Has anyone developed a true mono ball style bushing for the front control arms on a 240Z? Or is everyone using the camber offset aluminum / derlin kits like MSA sells?

Thanks,
Jeff

I made a tow loop out of an outdated set of racing belts and looped it under the rear bumper mounts. I folded up the extra and hold it in place with a zip tie.

I agree with the Ecsta at full depth. Works great in light to medium rain, as mentioned also works great on a drying track. Even in the true downpour, they should be fine, in that case visibility...

Well, bad news for me. Replaced the TC bushings (the old ones were trashed, esp on the driver side from the header heat) and replaced the rack bushings just because.

Checked the toe just prior to...

I have one listed in the classified section of this website. I started to prep it for ITS but need to make a change in plans. I also have 8 K1 rims and some other parts listed there as well.

You...

Thanks for the info guys. New TC kit and rack bushing on the way. Hopefully we can get out to a test session before the next event.

Jeff

Sorry guys, my server has been down for a while due to router issues. If someone wants to host it, and has FTP, send me the info and I can FTP it over. Email powerslide91 at yahoo dot com.

I...

So I am posting this sort of real time as I look at the car, but so far:
- the rack seems tight as far as side to side. I am going to replace the bushings and maybe use a reman rack anyway.

-...

Thanks for the info guys. All good stuff. I'll post what I find as well as I work on it this week. It does seem to be something like the rack slipping (scary thought!) as everything still seems...

This past race weekend, my 240Z developed a new problem. A few laps into the session, after a high speed lefthander (~100mph) almost 180 degree turn, the steering would not return to center on the...

I run mine under the car and it stops just behind me, then has a 45 turndown that can be rotated to make small changes on sound readings.

I found it was pulling in exhaust pretty bad. Found it by...

So does anyone have any details on which roll pins need to be replaced and how to do the proceedure. My trans has held up for 3 years of hard racing with no issues, so now that I have jinked myself,...

Thanks for the feeback on the belt mounting.

Jeff

So am am going to try switching over to 6 point this year. Ordered from Simpson.
http://www.simpsonraceproducts.com/product...90&prod_id=1944

What do people do for the mounting of the 2 anti-sub...

K, try this address;
www.rcubedmotorsports.no-ip.com/04enduro.htm
I think it gets fussy if it is missing the htm like the address I typed above. If it still does not work, then I don't know, but...

Hey K,

Here is another option for the recorder that I am now using.
http://www.compuplus.com/insidepage.php3?i...fwwlq6u3zp33s0v
I tried for years to use a 8mm camcorder and was never happy with...

Is anyone using more than one lipstick cam for their incar footage? I have just decieded to step up to a CCD camera system and would really like to have the main cam pointed out the front and a pic...

Thanks for all the leads, Alan, let us know how it goes for you if you don't mind.

Seems like the guys on GRM like the Rustoluem product...

Jeff

Thanks for the feedback!

J

I am just about to close on a new house. I am toying with covering the garage floor with epoxy to make it stay nice with all the car work.

Does anyone have any recommendations? I have heard a...

The helmet I currently use is rated SA2000. It is in good shape but I find it a bit uncorfortable. I'm thinking of replacing it but am worried that the required rating will bump up soon, meaning...