The easiest way to put it is that Keith took full advantage of the rules when it came to strut housings. I am lucky enough to have two sets (one set for each car). Most, if not all Z cars have bent...
Type: Posts; User: specialtyautomo
The easiest way to put it is that Keith took full advantage of the rules when it came to strut housings. I am lucky enough to have two sets (one set for each car). Most, if not all Z cars have bent...
Actually it was a 118 and small change. The car was on dot's and the only thing not ITS legal is the rr shocks. Great weather and good drafting partners a (gto and a 914-6). Three laps were in the...
Another note. Chasis dyno comparing the 240 with sunbelt power to the e36 the restrictor needs to be at 31 or 32 mm to give the same power to weight ratio. There are alot of 240z out there with over...
I have the KVS e36. I have run it with the restrictor in BMW and PBOC along with a few test days. I have Chets 240z to compare lap times with. I have run a 145.2 at Barbers this past march with the...
i had a few made that are aluminium and weigh about 1/2 of a sock pressure plate. still have two left on the shelf. i have been running one in chets old car for 4 years now
Scott, the Sentra is close but Steve and I both have had a very busy schedule. I have been getting customers cars ready for the season and Steve had some big projects for a car show. I am also...
I have a couple of unused hoosier dirtstockers with dot numbers on them. Are they still usable with SCCA? BMW CCA has ban them.
I'll say it again give the e36 300lbs no restrictor and rr shocks bhahahahahahahahahaha. :dead_horse:
I have read the posts and I say give the e36 300lbs and remote reservoir shocks bahahahahahahaaa. :035:
We make those power numbers on the stock spring, new ones from bmw. The trany gearing is pretty good and with the right final drive there is no reason to turn more that 5100 rpm. the stock spring are...
I have an e30 ita 325e in my shop now. At 2550 it should be a very competitive car we have seen 135 to 140 rwhp and 165-170 ft lbs of torque. It has very good brakes and very good handling with the...
[quote]
We have monthly Board meetings that are open to the public (and a membership meeting on Feb. 20) where I'd rather engage in discussion/debate on our funding, but I WILL use this forum to...
OUTSTANDING Butch. Those are the kind of things that need to happen. We can never have too much information.
Thanks Bobby Bitterman
Is there KOOLAID at these secret meeting? B)
I agree on the KONI. The DA konis are the way to go. They work darn good on the swift. We have also put koni da's on steves new ita sentra.
Bobby Bitterman
I was there too! In my opinion the majority of the track damage happend Friday in the test-day. Remember how many times the track was shut down for oildowns. Alscca failed to photograph or record the...
[quote]
I've heard the same information Bobby. Thank you for further confirmation. I have also heard that some of the Alabama folks have approached Mr. Barber on their own trying to patch things up...
Scott, I am definitely not defending MATTBERG. It was announced at ALSCCA banquete last week that it was ALSCCA and no one else's decision not to race at Barber. David Leonard spent an entire day at...
Its a beautiful day in the neighborhood! :blink:
Thanks Joe I will look into that!
Toni, I would like to make myself clear. I think Fred, Jim and yourself do an outstanding job!! The three of you do far more than most for alot longer time. Don't get me wrong I support change and...
Joe thank you for your suggestion. My wife spent about 10 years on alscca BOD and was the regions registrar. We have a copy of the bylaws, it pretty much gives the RE absolute power. The bylaws are...
Matt, I am one of the 47 drivers from Alabama. A few other of the drivers are my friends and customers. That being said, I assure you that most of those 44 drivers don't support Our region racing at...
[quote]
Last chance Barry. I can't wait 24 hours. Sorry. I Need to get on a plane and this can't wait. You've been silent since the memo that you said "didn't exist" was produced so I sort of doubt...
Wahoo. Steve can't wait to drive that moster with you. Scott we should have some good fun. I introduced Steve to FWD and I think he is getting it figured out!After Greg Amy's lap times at the ARRCI...