Kirk, I'll plead guilty to looking at this from a personal perspective. I agree that SCCA needs to think strategically, but part of thinking strategically is providing racing programs that are...
Type: Posts; User: TomL
Kirk, I'll plead guilty to looking at this from a personal perspective. I agree that SCCA needs to think strategically, but part of thinking strategically is providing racing programs that are...
"Nothing but expense, travel, and a chance at the Runoffs were the only advantages to nationals aka majors."
Stephen, there's a solution to your problem -- don't run majors. :) You in the NEDiv...
The weather was kind of hit or miss both days, but it was, roughly, wet in the morning qualifying and dry in the afternoon for the races, although the ITR/S/A/7 race Saturday had a few drops of rain....
Note, it now says not less than 45 minutes, not "no more than" like it used to. What I was told is that they will now specify 45 minutes for all Pro-IT races, and that is what the supps for the...
For the last couple years, we've had a program with Toyo that paid up to $150 for a win in IT7. (From memory, it's 150,100,75,50,25 for the top five if there are 5 or more starters and $40,20 for...
If anyone thinks folks here are contentious, you should see them on the prod forums. My best example was once when I asked a very specific question related to how the prod suspension rules applied...
If anyone thinks folks here are contentious, you should see them on the prod forums. My best example was once when I asked a very specific question related to how the prod suspension rules applied...
The really cheap way to install a legal tow eye is: 1) acquire 2" u-bolt (old muffler clamps are free), 2) cut 3" piece of steel strip, say 1 1/2 " x 3/16, 3) weld u-bolt to strip, 4) drill two holes...
Thanks, Steve. So if I understand you correctly, your main concern is that the standard flapper valve doesn't work quite as well as a NASCAR ball system (or the newer Fuel Safe flapper that's...
Steve - I'm not sure if I understand the point you are making (and whether you are addressing my comment or the original question and picture.) All FT-3 spec cells that I am aware of use a...
Maybe I'm missing some thing, but why do you need to do anything other than clamp the appropriate hose to the filler neck (using a pre-bent hose if you need to have an angle)?:shrug: I've done that...
Can't help you much on the exhaust. I use a round (not bullet-style) Dynomax racing muffler (3 inch inlet and outlet), but I typically hit about 100db at the track. Never been over 103, but I have...
Yea, I forgot the part about the 1.5 x .120 option going away (also I ignored the older option of using a thinner/smaller tubing if it was chrome moly). On your STU question, it depends on whether...
No, note that the table says "GCR Vehicle Weight", which in all cases includes the driver. So regardless of what your car actually weighs, your required cage tube size is based on the minimum weight...
If you are going to race at SCCA SE Division races, you just need to go visit the Appalachian Tire truck, which services all SEDiv races. All you need to do is call them a week or so in advance and...
I don't know how this will work out in the long run, but at the ARRC, I showed up with my hard card and still had to sign the SCCA waiver (and got a nice little sticker put on my nice new card). Just...
Thanks guys.
Joe - If you remember all that, I think you you're under hypnotic recall already - no sleep needed.
Chris - I've never heard of that the pickup points were changed on the later...
I've seen some anecdotal evidence that early first generation RX-7 tubs (1979-80) are a bit (50-100 lbs) lighter than the later models. Most of the ITA/7 cars that I've seen that are close to minimum...
Paul -
I realize you can move the center of travel a bit by adjusting strut tube length and the size of the spacer (or not using one) under the insert. I just don't see how that is influenced in any...
Paul-
Sorry, but I don't understand your point about choosing your spring length to "center your shock travel". Once you choose your shock brand and length, and decide on your ride height, the...
Unless you got the foam pre-cut for your specific cell (and that's rarely the way you get it - it's usually just in big blocks), what you also want to do is pull out the old foam first then use the...
I keep seeing discussions on this topic referencing stock group size as a criteria (e.g., Josh's comment above)and I keep wondering why. As I recall, the rule used to require stock group size, but...
I measured two that I have and the core dimensions were 19.25" and 19.75" by 4.7". Overall lengths are 22.5" and 23". I think mine are off early model RX7s (79-81) and they definitely have a...
Hey Butch -
Even if we can't get into the track until 8:00 on Thursday, will registration still be open at the advertised time? I.e., can we register at 5, even if we have to wait until 8 to...
Ron- Fletcher's e-mail is [email protected]. Drop him a note and I'm sure you'll be able to keep your trailer with the car. The only open-trailers I see parked in the lower lot (i.e., away from...