Search:

Anyone seen an entry list yet? I am planning to attend for SM and ITA.

Your start looks pretty impressive on my video. I couldn't see the flag and by the time I moved over to see it, it was waving.

My off in turn 1 was because the Miata on the inside of me was in...

Here is my video from the Saturday ITA race at Gingerman. Had a blast battling with the ITA Saturn. I ran in full SM trim with the restrictor plate so I was a little under powered. No time between...

The 1300 piston idea is great for a tuner kid on the streets as "cheap" compression gain. But for the ITC racer, if you want to deck the block/head, there is already very little room to deck and...

What? <_<

The Si piston actually has a larger area dished out of the top of it, which would create less compression when used with the CVCC head.

The radio and speakers comment sounded like a bit of sarcasm to me. I don&#39;t think he was serious.



Also, which is heavier... the door glass, door cover and door guts or nascar style door bars?...

Yep. Stock Honda mirrors. What do you recommend? I&#39;d gladly trash them.

I&#39;m in a 1986 Honda Civic DX and it weighs in at 1987lbs. The rule book is 1955lbs. I&#39;m not a heavy guy at 177lbs. I&#39;m not really sure where to shave 30lbs out of the car, or if I&#39;d want to with...

Why would you want to cover the interior openings? Just cosmetics? Won&#39;t that add weight? Plus, make it more difficult to push dents back out?

Greg - that&#39;s pretty crazy that you can run a stock radiator on your G-Prod car. I&#39;m guessing you also have an oil cooler or sump system? I am running the Honda oil cooler from the 86 Si that...

Is it worth the money to buy a prepped Weber or just buy a new one and an assortment of jets? Pegasus has the new one for $420 something and the prepped ones for $650 or so. Any idea what prepped...

What radiator options do I have for ITC racing? The radiator that came with my car looks to have been re-cored with more cores than stock. It has a couple of leaks and I&#39;m trying to decide whether...

Found one. Thanks.

I went with Honda parts for my rebuild. The 0.040 pistons came from OPM. I think it was worth it. Food for thought. I had a radiator issue in 95 degree heat and ran the car at 250 degrees for...

Bent one by running a little too close to a fellow competitor. Anyone have a spare steering rack for sale for an 84-87 Honda Civic. Manual, not power steering. I think the CRX is the same part?

Steve - Did you see how much my car did the "dog pissing on the hydrant" this past weekend. It&#39;s just a product of front wheel drive. You&#39;ll want less rear traction anyway - and what better way...

Any thoughts on R6 vs. A6? I have heard that some road racers are using the auto cross tire, A6 for shorter, under 30 minute sprint races. What&#39;s the difference in compound? A6 softer?

Speaking as another Waterford racer and a guy who was just a step too far behind you trying to buy that fuel cell, I&#39;d mount that cell close to the stock location. You&#39;re in a front drive car,...

Looks just like a crank seal leak to me. Mine had the exact same leak in the exact same place before we did the rebuild. If it is the original seal from the factory, it might have been put in on a...

GCR page ITCS-10
Section 5. c. 1.

Any anti-roll bar, traction bar, panhard rod or watts linkage may be added or substituted, provided its/their installation serves no other purpose. The mounts...

So was the effort of building the bar mount worth it? Does he make use of it or is the bar run pretty close to the stock location anyway?

My stock panhard mount to the chassis is bent up and looks pretty weak. It looks like it has been whacked a few times and I gave it a little bend myself by brushing the wall. I am thinking of doing...

Any suggestions for a starting point on ignition timing for road course racing? The motor is a fresh rebuild that has been bored to .40 over. Follow the Honda manual or are there advantages to...

There's my question... what tortion bars are you running without the swaybar? I'm on 26mm or really old worn out 27mm bars and the car had way too much body roll without the sway bar. So much roll...

That's what I was wondering - this is one of those rules where you can't do it because it isn't mentioned that you can.

My stock mounts are beginning to crack and get nasty. I pulled the ones...