Search:

Could be one from a GSL-SE. I think they were mounted in front of the rad - not below it like the 12A cars.

Is Atlanta RX7 still around? They may have one... but not for cheap.

May also try...

Hey, thanks Kevin, but I'm talking about the oil control springs on the rotor oil seals.

Mazdatrix sells them, but I can't find them on the Mazda comp site.

Mainly I'm interested in feedback...

I'm putting together a 12A and I am wondering

1. If the comp oil control springs are a good idea, and
2. If they are a good idea, what's the mazda part number. I tried searching on Mazda...

I had heard that carbon seals chip quite easily, and that you have to spend extra time getting the length of the seal just right during the buildup.

No direct experience on my part, anybody have...

I'll have to measure the amount of oil each session a little more closely next time I run, but I'm pretty sure I ran at least one session below the full mark - and still had oil in the catch can...

Hey,

Looking for some help with a problem that showed up in my first race weekend this year.

For a catch can, I have some heater hose running from the vent on the oil filler neck to a plastic...

I know that Paul Yaw raved about them on his site, and some of the fast 7's have them - two of them - one for leading and one for trailing?

Thanks for the offer Kevin. If it's not a whole lot of...

I've installed an MSD box in my IT7 and I'm having some issues. Hoping some one can help me troubleshoot.

Setup:

Leading-
Single MSD6A
triggered off the leading mag pickup
Using the MSD...

maybe you are aware, but Spec7 is different than IT7.

Spec7 is a regional class that has a spec suspension and very limited mods to the car. It's very cheap and can still be fun if other people...

Thanks,

I'll be getting EGT soon, just not by tomorrow. I think I can get my hands on an IR gun, so I'll probably try that out.

I'll probably run the T&T since my race water and oil temps were...

I run an IT7 car, and I am planning to run a test and tune on Friday (9/9), but I am concerned about my carb.

The carb has been installed on multiple motors/intake mani's and it never idles well. ...

I'm trying to run the test and tune day at CMP on May27th, but I'll be in a new car, so I need a log book.

Does anyone know if someone will be at the track in the morning on Friday to do the tech...

Hi,

I need to mount a kill switch in a first gen RX7. I want it to be accessible when I am belted in. It would fit nicely in the left hand air vent, but I'm not sure if this meets the "easily...

Ok, thanks. That's similar to what I was thinking of doing.

I searched, but I didn't find a nanswer to this one.

When I'm mounting an aluminum seat(Ultrashield Rally Sport), can I just drill holes through the aluminum for mounting bolts? Aluminum is...

Anyone have a way to contact Paul Perez - IT7 racer?

I need to know his contact for cage installs.

Thanks,
Neil Gueldner
704-807-7254

I also just got a 20' enclosed.

Any advice on how to wire in 110v? Are there standard electrical boxes(like for an RV)for mounting in the side to feed in AC power?

Also, when adding air con,...

I need to know the contact info for his cage installer in SC.

Anyone know how to get in touch with Paul, or know who does his cage work?

Thanks,
Neil Gueldner
704-807-7254

Thanks,

I'm going to try to work a deal on the enclosed.

ITANorm, When you say your trailer is narrow, I'm assuming it's an 8' model? Do you exit through the window of the car once it's loaded?

I checked and this trailer is 8' wide not 8.5'

My car...

Thanks for the replies.

The titan is rated to tow 9200 lbs, and I figure I'll be towing less than 6500 lbs total. My car is an ITA RX7.

I've been using a $1000 used trailer, and it has been a...

I tow with an '04 Nissan Titan, so I think I'm ok on tow capacity.

I checked and comparable enclosed trailers new are about $5500 - but with a beaver tail and some tie downs (and warranty). ...

I need a trailer, and I had planned on getting an 18' open steel trailer. Prices seem to around $2000 to $2500 depending on whether it has a full deck or not.

Then I find a 2001 8.5 X 20' Cargo...

Thanks for the replies. I have a couple of questions about updates.

1. The struts are definitely longer on the 79, but the brake calipers and brackets look pretty much the same. I had heard...

Are there any major disadvantages to using a 79/80 model chassis as a basis for an IT7 car? I have heard that the bumpers are heavier, is this true? I know the front struts need to be swapped to...