Search:

Well, the first race weekend was a long one and has some oil pressure related problems (don't know if the oil pump or what??) The car was running strong during Saturday's practice, then in qualifing...

I am currently running an 86 itc civic with:

larger torsion bars (27mm? or 29mm?) tokico's
hoosier 205/60/13,
approx 2.5 of camber and 1/4 toe in
opm type rear bar with the heim joints set a...

Just finished doing some work on my 86 carbed motor, which included replacing the oil pan due to beat up drain plug threads. Well, after finishing the entire motor I went to replace the pan with a...

After reading this post I have another oil pan question. Just finished doing some work on my 86 carbed motor, which included replacing the oil pan due to beat up drain plug threads. Well, after...

I am currently running an 86 ITC Civic with an EW1 carbed motor. The motor I have now is running strong but I am thinking down the road a bit. A friend of my suggested that if I am looking for...

Yes, the car does have a Quafe limited slip, which I must say does a great job. What do you mean by radial movement. What is your email USGUYS?

Thanks!

Another quick question. I recently noticed that my tranny developed a small leak around the drain plug housing. After further inspection a small hairline crack was discoverd (from he-maning the plug...

During my first drivers school I noticed that my tranny was leaking some major oil. After some inspection I noticed that the drivers side axel seal was leaking......again. When I bought the car a few...

Is that the approx. 1.0-1.5 in. rod that protrudes into the carb from the mixture unit? So I should remove the unit and snip that off?

Thanks.

That sounds like a great deal! But I have a fresh back-up motor with a webber that I am going to install when I learn how to race!

I will get in touch if I need one.

I am currently in the process of cleaning up some wiring in my 86 itc civic and have a quesiton on this wire that leads into the stock honda carb. I guess that it needs to be used with the stock carb...

I am looking for a passenger seat for my 86 itc civic for instructors during track days. Let me know.


Thanks

Do you need a special tool to remove the ball joints, tie rods, etc.

Thanks,

I have recently purchased an 86 itc civic with an 5 speed si tranny w/ lsd. The previous owner had just installed a new clutch before i purchsed the car. While towing the car home I realized that...

I have just purchased an 86 itc civic and would like to get names of aftermarket suppliers who specialize in carb hondas. I know that opm has a great selection for the older models, but I have not...