K&N or OEM here. I have used the NAPA filters that were made by GARD and WIX with similar results in our GT350 (long ago :)) when I had it. The K&N or NAPA or OEM seem to do an excellent job. One...
Type: Posts; User: jc836
K&N or OEM here. I have used the NAPA filters that were made by GARD and WIX with similar results in our GT350 (long ago :)) when I had it. The K&N or NAPA or OEM seem to do an excellent job. One...
Some states allow it and some don't. PA has a thing about rollcages-mainly if they have NASCAR bars IN the doors. The arguement deals with the ability to escape. Then there is the issue of...
For what it is truly worth-I have used both and found little difference. Then again the car has not been on a dyno and is completely stock (emissions still connected too). We do have the...
Same as Joe H
Watched pieces of the "show" and was bored silly. The track is simply a road in a sandbox with some fancy signs. The fact that MSC was on Pole and Alonzo won made fo the interest of the day. Speed...
There are several reasons for this. One is that in time Nylon will stretch and deteriorate. I do not agree with the severityof the rule as written. However, I do believe that after any major inpact...
You do not have a car that meets the rules for Improved Touring-enginewise. It is fine to have this swap for a car used for HPDE and certain autocross classes. With that said-you need to refer to...
Manny is absolutely right as to the supplier I have been using. Racing Electronics does a great job overall. Our local Motorola shop (Mobile Radio Service) has the expertise to do installs and...
Bill:
Check you e-mail again.
Do try the alternate that you mention in your PM and let me know.
Bill:
If you have a feed from the alternator to the "main" fuse panel underhood that is attached to the Positive feed of the battery-it also need to be switched. This is easily done so that it is...
Bill:
Not being fully familiar with your switch is not a problem. You really only need to cut power such that the ECU or Ignition box (MSD for example) along with the pumps and FIELD are killed. As...
We use both 2 channel and 16 channel radios from Motorola. The 2 channel are generally all you will ever need. This assumes you do not want to scan the SCCA or other track frequencies. Many radio...
I have provided this answer before-but you need to revisit what you are doing. The way our Longacre 2 pole MS is wired is that the 2 large terminals are in series witht he Positive lead from the...
For those interested in this product-please contact Firefox Industries (www.firefoxind.com). They have it and can supply you with the info you are looking for as to its efrfectiveness versus AFFF. ...
Bildon-Did you contact Wally at Trailer World in Bowling Green? He seems to come up with things.
With time, money and desire anything may well be possible. The cage can be removed either whole or in parts. The best solution would be to take the roof off both chassis and go from there. If you...
You are dealing with a very dated car. Try the dealer-I found all sorts of '89 trim for the CRX and the prices were not bad. Many dealers will discount if you ask. The alternative is to find...
This agent has been available for some time. You can learn more fromwww.firefoxind.com. These folks supply it and AFFF. Got Q's-call them. Very friendly folks. :D -Their decal is on our car.
...
I asked my mechanic how much and he quoted me $450 plus parts for a carry in rebuild. The Synchro's and bearings will be the major expense. Have the forks checked-not bent. If you are reinstalling...
Our Prelude had the SS-SportShift and it was very enjoyable to use on track at The Glen and Pocono. Very similar to the Proshe Tiptronic setup. The only thing I did notlike was that the torque...
The only thing that comes to mind is that they are for the 'Field' circuit. You can check this by putting a test light or meter on both terminals and setting the Ignition switch On and Off to see...
You have e-mail
Our 5# AFFF system uses 2 nozzles facing the intake and will flood over the top of the valve cover. The spread to each side is 160 degrees, which covers the entire engine bay. Foam sinks and will...
You might want to contact Firefox Industries (my supplier) as they have done extensive testing on this subject. Most of the cars I have seen with a nozzle in the rear attempt to flood the area in...
There are several that come to mind. AutoPower and Kirk Racing (our supplier). There are people out your way that can custom fab one. Check with someone in the local SCCA region for a referral. ...