Search:

Y'all should have run it when there was no 10 a&b but there was the DIP. The old guy know what I am taking about.:o:blink::eclipsee_steering:

In a Niki carb volume is more important than pressure. 2.5 - 3 psi is good. More is bad. I run a 1/2 inch line from the pump to carb and use the stock line for the return line. Never had a fuel...

+3 for Harbor Freight. My 3ton regularly lifts a 94 Suburban 4 years old and still going strong.

I cannot find a schedule of events on the MidSouth Web Site. What are the run groups and the schedule for same?

Inquiring minds want to know. :shrug:

I use two MSDs. It was recommended to me years ago when I first built the car. No problems ever.

David Dewhurst

I am interested in the modified large bearing struts with Blisten you mentioned.

Please contact me at: [email protected] with a price.

Thank you.

Went to their web site and it said that they would not be restocking any out of stock items for the 1st Gen RX-7. Other than G-Force are there any other suppliers out there for the 1st Gen RX-7...

Here are a couple three things you can do. I am assuming that you have adjustable sway bars.

1. Soften the rear sway bar if you have one.

or

2. Stiffen the front sway bar

or

I'm in there somewhere.

I have a question. Why would you rebalance each time you swap sides? If the tire is balanced on the car "spin balance" I could understand it. If the tire is bubble balanced I think it would be OK...

On the 1st Gen Rx-7 I get 5 degrees + Caster. Equal on both sides. Car is pretty light I never had problems with steering effort. No power steering. Car does not have rack and pinion steering.

I use Yamalube R two stroke oil. Mix 1 oz oil per gallon of gas or 1:128 A gallon is 128 oz. I could probably go to 4 oz per 5 gal which would be 1:160. I know a lot of guys that mix 4 oz of oil...

when the my laps web site comes up from the link bill put in NO Group 4 appears.

Were are the Regional results?

Why not the pick up truck bed linner stuff. Its really tough and non skid. Will withstand just about everything.

There is a MS Media Player version at specmiatavideos.com

I am going to have my son burn me a DVD of it and the one that features F1 with Jacque V so I can play it on my 55" Hi Def TV. :119:
...

Norm,

Now that is a SHOP. :smilie_pokal: I wanted a 30 x 36 but the wife said I had taken enough of her back yard. :) Now to hit the PowerBall and do what I want. Hope you are feeling...

My shop is 24 X 30. I put in 15 two tube 4' lights. Had brain fade and left it up to the contractor. He put in cheaper units, i.e., 2 tube. If I had to do it again I would make sure he put in 4...

How about a dream ride.

Ford Excursion with 7.3L turbo disel with a Banks upgrade. Can you say 500HP with about 1000 lbs torque and about 15-17mpg highway none towing. :119: You will...

While we are on the subject of tools. Does anyone know where I can get a ratchet hex drive 5.5 mm?

My Craftsman's allen wrench set has a 5.5mm in it. I would like to get a 5.5mm 3'8" drive allen...

I have an Eagle four post 7000 lb capacity. Cost with alum ramps, jack tray, drip trays and rollers was about $2,700 delivered to truck depot. Took a day and a half to get it installed. About 5 of...

Last year when I spoke the Hoosier rep at StL he told me not to mix 04's & 05"s on the same axel. :018: It seems the 05's are suppose to have better grip. You may want to mix them front to rear....

Well, mine happen several years ago at Memphis. Got to talking while I was changing the rear pads on the RX-7. Forgot to tighten the caliper bolts. :bash_1_: First race of the weekend - Second...

IMHO, I read the rules a little different than you do. I don't think they say you are matching the engine and maniford to the gasket. You are matching the two engine parts. Therefore, you would...

I typically budget between $600 and $1,000 for the average race week end. This includes entry fees, travel, motel, food, incidentals while at the track. It does not include car prep and tires. The...