There is a guy in Alberta still running a tub based GT3 1800ES.
Type: Posts; User: Streetwise guy
There is a guy in Alberta still running a tub based GT3 1800ES.
John Berget race tires (sp) in Wisconsin sells a ton of takeoffs, but you are at the mercy of the race gods as to sizing.
Does the 71 still have 3 hoses at the pump, or was that earlier? Volvo quit those pumps years ago, and Bosch followed suit fairly quickly. Now the good news- any modern pump can be used, since most...
I've got a set or two of the Virgos, and bits and pieces of various other sets. If you are in need, I will climb the racking and take a small inventory for you.
Very good article by Charles Espenlaub about his fire at Thunderhill. I may reassess my dislike of wearing a balaclava, and check for worn spots on everything.
It does not look like much to me, and its ahead of the area thats stressed most by suspension loading, but if you are concerned, ask your local body shops for the best unibody/frame repair guy in the...
Before or after an hour in the car?:rolleyes:
Racequip 3-2A/5 is about 4 pounds dry.
I am 240, and I have to carry about 60 pounds of lead to make 2650. I have not been diligent about weight removal, but I would be surprized if there was another 100 pounds to lose legally.
As a...
http://www.wurthcanada.com/
Dunno if these guys distribute south of the border, but they have every option I've ever wanted.
Pull the connectors apart at the bumper and make sure none of the wires have pulled out at all. Mine was a wee bit short, and would pull on the harness on hard jacknife turns, causing your problem. ...
To add to Gregs Ford story- The reason the 7.3 diesels hold their value so well is that nobody wants the 6.0. It was a nightmare, and Ford still can't come up with a head gasket that will stay in it....
One thing you want to watch for sure is that you are buying LT (light truck) as opposed to P (passenger) tires. There are also reinforced light truck tires. Go talk to an educated tire guy that sells...
Either buy a code reader from Napa or Autozone or wherever for $50, or spend a couple grand on a real one from your local Snapon or OTC guy. There really isn't a lot of middle ground, unless you find...
Like no naps on the back straight or anything? I'd have a tough time staying awake 25 hours running through the forest with Neo-Nazis chasing me with axes.
I also forgot the part about moving the main sterter cable up to the main stud on the fuse box, then running a new cable from B+ to the kill switch big post, and returning from the other big post...
I you just cut into the small battery cable, you leave the alternator and starter main power cables connected to the battery. No issue for voltage spike, and it will shut the car off, but isn't the...
hmmmmm......
The ASD (Automatic Shut Down- $30.00 words meaning "MAIN") relay powers up lots of stuff on a Chrysler. Coil, injectors, field windings in the alternator..... I cut into the wire from the control...
I've got a call into the local circle track Goodyear dealer to see whether I can buy through him- They are on my list for sure.
The nanny state strikes again. Life is becoming sadder all the time.
I have a Spec clutch in my Neon, Stage 3 I think, and had the same question. Couldn't really come up with a good answer, so I just went racing. It took maybe 3 weekends (which so happens to be...
You can tow anything with anything. Speed of travel , however, can be an issue......:rolleyes:
http://www.300zx-twinturbo.com/cgi-bin/manual.cgi
Not so good a diagram, but what you want to do is trigger from any of the coils, on the wire running to the power transistor unit. There will be...
I doubt the ECU is actually the final stage of the signal for the coils. The amperage required to run a coil is way higher than an ECU is designed to handle. It will drive an amplifier, possibly...
I just read in Grassroots that the other sanctioning body has signed a contract with Toyo to supply RA1's for all their spec series for the next three years. That would seem to suggest at least a...