Sounds reasonable to me...again not being familar with 944's not sure how their ECU logic works.
Could be a bad ground that just happens to be "good" now.
Crank angle sensor loose?
Type: Posts; User: Quickshoe
Sounds reasonable to me...again not being familar with 944's not sure how their ECU logic works.
Could be a bad ground that just happens to be "good" now.
Crank angle sensor loose?
Thanks Greg, I am now up to speed.
Effectively this Shine bar isn't twisting along its' centerline but trying to push one end forward as it twists (co-axially) and resisting an increase in length...
Greg,
So that "plate" section on its' edge is the only factory roll resistance at the rear? This blue bar bolts to that plate and adds to its' rigidity? Are there clearance issues that would...
Yes, in a straight shot from the center of the stub axle to the center of the bar, not following the curvature of the trailing arm.
The lever arm length will be the distance from the center of the bar diameter TO the end of the arm that is providing the twisting force on it (trailing arm?).
Any CEL codes? If it isn't a serious issue it might have to go through a number of off to operating temp cycles before it throws a code.
Disclaimer, it is late and I am just thinking out loud. I...
An ISAAC does NOT attach to the belts. It captures the belt between the roller and the c-shaped piece that receives one end of the damper. Not that I think that makes the device any more or less...
Damn it! My brother in law and I were just talking over New Year about a dual density padding. Something as effective in high G stuff as the "hard stuff" but something a little more compliant in...
About 15 years ahead of ya'
Okay, I've been accused of not being able to think outside of the box before---so here it goes:
If not using anything at all or a HANS requires ONE point of release, how do you satisfy the wording...
According to the "archive news" on the SFI foundation website, 38.1 was announced in Jan 05. The search function on this site has Gregg promoting the ISAAC in Nov 02.
Seems extremely clear to me...
If we AREN'T OKAY with it, what would you suggest we do?
Car feels too "nervous" or "twitchy" ????
If the car is balanced soften the rebound at all corners and see if the car is either a ) faster, b ) easier to drive as fast or c ) combination of both ...
Kirk,
Subesports, WineCountryMotorsports and Driving Impressions all had the OMP suit I wanted at the time, no SFI patches on mine.
In the end, I bought mine through an importer that had an...
It certainly wouldn't hurt Dave. Unfortunately the drag racers, roundy-round and desert guys have lots of SFI required equipment and their numbers are larger than ours.
SFI 3.2A/10 and higher rated suits expire no more than 4 years after date of manufacture.
Wuss. :D
VP C-44 perhaps?
Cheaters in middle of the pack? I've encountered cheaters everywhere in the grid. Cheating is a result of their ethics, not their skills or budget.
Ohlins is coming out with a new shock that is more economical than their typical stuff. Supposed to be similarly priced to a 8700 series Penske.
Wow! IF they are running a fuel that passes the test how is that cheating?
DC 15 MAX right?
Further, the ITCS allows for "oil and oil additives are unrestricted". Rotaries mix the fuel...
Area under the curve with the start and end rpm points to be defined as the RPM at which peak HP occurs less the rpm drop between the closest two ratio gears (3rd-4th in many cars, 4th-5th in some)...
Clarification, the survey isn't internet heresay. It is available for viewing by anybody through a link on the Mazda comp home page.
I am not a member, so I didn't complete it, but I can view...
Gregg,
I understand your concerns about a standard including both performance and design parameters. I think this is a little different than other SFI and FIA design standards :D
I can't...
Gregg,
I am not so sure you'll find the actual test data published by any manufacturers.
Simpson uses the model number of their suit to correspond with the TPP rating. A "19" is supposed to...
Now there you go :happy204: . Just hope you didn't buy a lightweight fancy FIA suit that breathes well cause all that is going to hell in a handbasket.
Matt Rowe,
I wasn't trying to be rude. My apologies that it came across that way.
I was attempting to illustrate that there are things that we all make assumptions about. This situation may...