over the weekend at Beaver run, my Longacre race jack was stolen.
the event was attended by members in the virginia, penn. and ohio areas.
it is worth over 600 bucks, and has the Longacre name...
Type: Posts; User: HiRcc#21
over the weekend at Beaver run, my Longacre race jack was stolen.
the event was attended by members in the virginia, penn. and ohio areas.
it is worth over 600 bucks, and has the Longacre name...
One thing we do here in Ohio during the dog days of humid days is we use a special intake gasket between the manifold and cylinder head, plus reflective tape.
The gasket is made from teflon and is...
Edwin-
The itc guys that are buying Panasports from me are running the 28mm offset, and running the 225/50/13 Hoosiers with no problems.
A set of Panasports shipped is around 690.00 for the 13 x 6...
My understanding with this pan is that the baffles can cause oil starvation.
Guys that have run the pan with out installing an accusump to keep pressure to the bearings, have blow up engines.
I...
Solo-
If you haven't found a solution, send me your email address and I will send you pics of how I did a cage that posed the same problems.
I removed the filler tube for welding, but it cleared...
update and backdate rule applies here fellas. Unorthodox was not an O.E. parts supplier to Honda, so therefore, it is not allowed. The part must be O.E. Honda stuff, not alluminum, heck if your...
Progress does make the LCA spherical bearings, and I have a set in stock. they run 125 for a pair. I have them in both inner and outer at the rear, and in the inner at the front. The car holds the...
Richy-
I looked at your car pics! How much was your cage? Nice job by the constructor.
Truck looks great lowered.
BTW- Lee did my Koni's for my crx, no problems, I think I paid like 220 to get...
It is exactly the same diameter and all as the stock si pulley, except the true center of it is moved towards the block and the A/C part of the pulley is "outbound" which allows it be machined off...
I use an adjustable rear bar from Progress Technologies http://www.progressauto.com/
It is nice to have when it rains!
I have a prototypical bar right now,and they are due into production this...
If you want a good guy to really put things in perspective, call Dan Paramore in California. (310) 523-4074.
I run a .20 over bottom end (my stock engine was real tired with about 110psi, as opposed...
Mr. Volante-
I use the 4.73 final drive. I know that Dave Beyersdorf (nee King car), has a 4.73 final and owns the Lap record at RA.
I challenged him on his ratio not long ago and when he told me...
If you call me I would be happy to quote you.
I have an 89 Si here at my shop now, if your interested to see my work. I refabed the cage and updated the engine and other things.
I am near Akron,...
Brent is right. There is a different O.D. on the cranks, depending on if the car came with A/C or not. This determined the proper pulley between the Std (HF), DX or Si models.
I have run the pulley...
Thanks Lawrence. Now let's pray for a dry weekend, with out snow!
Does Mid-Ohio have a snow plow in their fleet?
Jason B-
yes it is Bernardo. He and I are running the same set up. Our motor builder, Dan Paramore put Bernardo and I together in order to do some West Coast vs. East Coast testing with his cylinder...
Jason B-
I talked to my buddy with the dyno sheets. He said his dyno sheets are not for the Landspeed header. They are with the OPM header and the DC 4-2-1 and the DC 4-1.
He said that he found he...
Dave-
Sounds you have gotten yourself on the way to doing better than when you had the RX7.
I hope you get things sorted, and I am always available if you need set up data, or any parts upgrades...
Jay-
This is Chris, in Medina, we spoke the other night on the phone....
If Dave doesn't want it, you can have it. I haven't heard back from Dave yet....so Dave, if your reading this....let me...
Jason B-
sorry to take a couple days to reply, was out of town on business.
the dyno sheet you need, i no longer have. I wiped it out of my dyno in the spring. I have quite a few cars come through...
Dave-
you might want to replace the main bearings since your in there. They are about 40 bucks each, can't hurt.
As for the reverse gear, just make sure the syncro's aren't worn out, how is the...
yes dave it is me...
I do have a spare tranny, if you want it.
If you need a final drive gear, OPM has them on sale for 950 right now...just an FYI.
How's the crx doing?
chris
Louis-
Thanks for answering the question I put in my post. I was under the impression from talking to Tom a few years ago, that his header was more specificly built for Toms D16A6 config. in his...
Fleetcare, Jason B, and Tom Blaney-
Fleet- to answer your question first....
as for proving it won't be streetable...
I dealt with one shop for the last few years, and they know nothing about...
I have experience with both LSD's. I too, like the guys at OPM, however we did find some metal shavings in the trans fluid after a season of use. for the cost, it is worth it.
I have the Quaife...