Search:

I have the internals from a LSD from a BMW e30 diff. I had it removed when I upgraded to a Torsen. You can use it to turn any e30 diff into a LSD.

You can have it for $200 + shipping.
...

Talk with http://www.racetep.com/bmwngin.html#6cyl about M20B25 cams they have for racing.

An update on the Strictly BMW P3 pads.

We just finished an 8 hour enduro with these pads front and rear and still had pad left over, so they also make a great enduro pad.

BTW, when I was...

You may want to check out the pads at Strictly BMW for the e30 race cars. We have used them all this season and they are the best compound around.

P3 race pads...

I have mine done before the start of each season.

http://www.dksconsulting.com/images/e30_racing/red/redDKS2.gif

http://www.strictlybmw.com

[This message has been edited by djsmith (edited...

Front control arms w/ integrated ball joints are prone to failure.

Cracks in the rear sub frame.

Fuel pumps when they get noisy.

You should also replace the water pump each time you do the...

I make plexiglass side windows for my BMW. I used the old glass window as a template. I added some metal clips to hold the plexiglass ones in while towing/washing etc.

I use black or gray anti-seize on the pins and the rubber bushing. I also replace the rubber bushing often.

I run 600 front 700 rear and need to go stiffer in the front.

Any less than 700 rear and the shocks will bottom out. I have checked this many times with the tie wrap on the shock pistion method.
...

Here is one of them http://www.unorthodoxracing.com

Did a machine shop make the spacer for you?

I know of places that can make custom pulleys, if I had the specs.

BTW this is for my ICSCC EIP / SCCA EP e30, we are allowed to run anything for...

Zracer22, I like your idea of moving the drive belt to the smaller front pulley. Have you had any luck in finding offset pulleys?

From the classified section of this web site.

2001 ICSCC EIP Championship car. $15,000 obo

1987 325is e30 race car professionally build in 1994. This car can be raced in SCCA ITS or EP and...