Z Pilot Clutch Recommendations

I thought I posted this yesterday but I must have not hit submit.

Anyhow, what are your recommendations for a good clutch and pressure plate?

I'm dropping the coin on a "pro" motor so I figured I'd see what was out there for clutches and pressure plates. I've been using standard Nissan components and I've never suffered a clutch or pressure plate failure.

I heard about some some lightweight components that a racer here in the SE sells but I've not been able to get in touch with him about the parts. Certainly there is some weight that can be saved in the assembly. I know the components have to be stock diameter but even so one should be able to shave some pounds.

Any (legal) recommendations?

Thanks,
Ron

Stock pressure plate, Nissan Motorsports clutch.

i had a few made that are aluminium and weigh about 1/2 of a sock pressure plate. still have two left on the shelf. i have been running one in chets old car for 4 years now

Email me, [email protected].

Thanks,
Ron

Ron, I feel that setup really makes a Z engine wake up.......Looking to have it all together by 2010 I hope? You gonna like it once it is adjusted properly.

David

I would also be interested in one of those.

tcohen at ntelos dot net

Thanks,

Todd