Printable View
:023:
RACE CAR 72 Pinto w/ 6pt roll cage - $300 (gilroy, south county)
This is a rolling chassis.
Former SCCA ITB race car
Car is set up for a 2 liter/ 4 sp
Needs misc trim parts.
needs paint job, no rust tho.
has nice 13x5.5 rims.
make an offer.
contact: [email protected]
http://www.craigslist.org/sby/car/89238361.html
Might be in the price range?
:unsure:
Marcus
Marcus, if your looking for another car in your stable, I've got a partial ITC VW Scirocco, 1975 year model, that was destroyed in 1993 and then got about 85% through a rebuild before the owner lost interest.
Carb 1.6 motor with Quaiffe LSD. You would need to change the large valve 1.8 head with a replacement 1.6 small valve head (Which I have) and add some additional cage upgrades to it.
Pictures @
http://linerud.myvnc.com/racing/trailer/
It's just holding the trailer on the ground right now.
Looking for $1,000. That's just about the cost of the Quaiffe
Marcus, Thanks!! We found a 1980 wagon 20 miles from home with a good frt clip Lots of work ahead but with the history we have with our Pinto I think we will try to fix it. Did you get a new car yet? Thanks Glenn
Thanks guys, but no, My ITA car and Pro7 will keep me quite busy. I just wna;'t sure how badly hurt Glenn's car was from taking flight.
Besides Tim, I thought you were going to rent to Matt Weisberg B)
Marcus
Marcus, I was going to rent Matt the "real" race car that's in the garage, ready to go.
http://linerud.myvnc.com/racing/2003...S/April-LS.jpg
The Scirocco is not ready to race, yet.
Gotcha, I didn;t read well enough :)Quote:
Originally posted by racer_tim@Aug 11 2005, 01:19 PM
Marcus, I was going to rent Matt the "real" race car that's in the garage, ready to go.
http://linerud.myvnc.com/racing/2003...S/April-LS.jpg
The Scirocco is not ready to race, yet.
[snapback]58256[/snapback]
I do have some VW friends that might be interested in the Roc....
Marcus
Hey Marcus, I might be interested in that little 72 roller. You still have it? Granted, I would need to track down a motor and trans, then add some points to the cage, but thats not THAT hard... heh. Im in LA, so I would have to cruise up your way to get it (incidentally I went to college at UC Santa Cruz), but that wouldnt be too much of a problem for me. You have any pictures that you can email me so I know what I would be getting into? Thanks!
Ryan
[email protected]
Hi Ryan,Quote:
Originally posted by Jiveslug@Aug 11 2005, 11:38 PM
Hey Marcus, I might be interested in that little 72 roller. You still have it? Granted, I would need to track down a motor and trans, then add some points to the cage, but thats not THAT hard... heh. Im in LA, so I would have to cruise up your way to get it (incidentally I went to college at UC Santa Cruz), but that wouldnt be too much of a problem for me. You have any pictures that you can email me so I know what I would be getting into? Thanks!
Ryan
[email protected]
[snapback]58282[/snapback]
It's not mine, just an ad I saw posted on craigslist...
Marcus